Re: Vista 20SE, 5882 question

[Frank Olson <Use_the_email_links@xxxxxxxxxxxxxxxxxxxxxx>]

rfalcone wrote:
> I did major renovations to my house which involved removing my entire
> wired alarm system. And I want to re-install my previously hard wired
> Vista 20SE with all wireless sensors and keypads. I reset the system
> back to the default and removed zones 01-08. I got a 5882 wireless
> receiver and connected it to the keypad connections on the control
> panel and set it to address '0'. I thought I would see the 16 new zones
> starting from zone 09 or 10, but I don't. I do have a zone 09 with zone
> type 05 (expansion module supervision). The next zones I see are 92 -
> 99.
>
> Is there something more to connecting up the 5882 on the 20Se ?
>
> What should be the starting wireless zone offset ?
>
> Any other information is greatly appreciated.
>
> Thanks.
>


You have to enroll each wireless transmitter, then assign it a zone type
  and other attributes.  You'll need a 6139 keypad and the programming
manual to do this.  Good luck!