[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: How to default a simon 3 panel

Subject: Re: How to default a simon 3 panel
From: "Mark Leuck" <m..leuck@xxxxxxxxxxx>
Date: Mon, 30 Oct 2006 18:00:00 -0600
Newsgroups: alt.security.alarms
References: <687ca9639fa6f@uwe> <Ko479Xu0TvCfeLpRJim@xxxxxxxxxxx>

"Jim" <Jim@xxxxxxxxxxx> wrote in message
news:Ko479Xu0TvCfeLpRJim@xxxxxxxxxxxxxx
> Hi, this works with a simon 2 and may work for a 3
>
> Reset Memory to the Factory Defaults
> If it becomes necessary to set all programming back
> to the factory defaults, do the following:
> 1. Open the Control Panel cover.
> 2. Unplug the transformer and the battery.
> 3. Simultaneously press Cancel, Clock Set, and
> Minutes.

The Simon 3 uses Minutes+

References:
- How to default a simon 3 panel
  - From: sonitrol via HomeKB.com
- Re: How to default a simon 3 panel
  - From: Jim

Prev by Message: Re: Ademco LynxREN - How to enable LCD Backlight?
Next by Message: Re: Brinks vs. Tech-man.com
Previous by thread: Re: How to default a simon 3 panel
Next by thread: The Fire Alarm experts Strike Again
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home