[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: New 10 digit dialing problems



I discovered this problem back in the late 80's, when I lived in New York.
We decided then to only use 800 numbers from then on, and ended that problem
once and for all. With the super low cost of toll free numbers these days,
there is no excuse for all dealers to do the same.

Jim Rojas


"R.H.Campbell" <rh.campbell@xxxxxxxxxxxxx> wrote in message
news:YRz6g.4243$ix6.323175@xxxxxxxxxxxxxxxxxxxxxxxx
> Effective 17 June 2006, residents of the two area codes 613 and 819 in
> Eastern Canada will be required to dial the area code before the number in
> order to make any kind of local call. This has a major bearing on how
> alarm panels work, since they too have to dial a 10 digit receiver number,
> and I'm sure most alarm companies are rushing to reprogram their customers
> panels. However, I have to wonder what is going to happen to all those
> many thousands of older panels which have been acquired through
> aquisitions by the larger companies, and which are not capable of being
> dialed into to make the necessary changes to the receiver number. It
> doesn't seem practical (or even logistically possible) to make a visit to
> each panel to program the changes, especially for the largest companies
> with multi thousands of these panels in service.
>
> I have to wonder about those customers who will never know their panels
> are not working until they fail at a time when they are most needed, since
> at least one of the largest companies routinely doesn't use automatic test
> signals, and as such, no "failure to communicate" troubles will ever show
> up on the keypads. Also, you have to wonder how many fires will go
> undetected early because smoke detectors are unable to call in to the
> monitoring station, and the bearing that will have on liabilities at all
> levels... (Hello Prudential !! )
>
> I know 10 digit dialing has been put into place in many other areas of
> North America previously. Can anyone that's gone through it shed any light
> on what happened in their area when it came about, and what sorts of
> things we can expect to see here.
>
> Any way you look at it, it doesn't appear to be much of a pretty
> picture....
>
> RHC
>
>
>




alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home