Re: Electromagnetic lock wiring

["ABLE_1" <able1no@xxxxxxxxxxxxxxxxxx>]

First off you do not indicate the current draw of the MagLock and the
available Power Supply Amps.  This must be considered first.  After that
wiring config needs to be looked at.  So what are the values above???


<>I need some assistance.
>
> i installed a HID entryprox standalone unit using a padde
> electormagnetic lock. Ive wired the hid according to the wiring
> diagram. however the maglock does not function. The hid manual suggests
> that the mag lock needs a negative connection from the keypad and a
> main relay connection.
>
> In the Padde maglock there is a +, - terminal and a NC, common and No
> terminal.
>
> I tried connecting to the + and - terminal but the maglock just buzzes,
> red light and no magnetism. i tried one to the - and the other
> connection to the NC as the HID diagram recommends, but no power.
>
> Can any one give me an idea as to what im doing wrong, or maybe someone
> has the padde maglock wiring diagram
>
> thanks in advance
> sam
>