Re: Newbie question report code info

["Roland Moore" <roland@xxxxxxxxxxxx>]

To enter the expert zone programming mode press " * " + 58, screen displays:

ZN ZT - RC IN : RT(L)

01 09 - 10 HW : 1

ZN = the zone number, ZT = Zone Response Type, RC = Report code, IN =

Input type, RT = Response time, & L = Loop number. To move around in this

field press " * " to move to the ZT press the "A" key moves to the right,
the "B"

key moves to the left, Press " * " to enroll the serial number for wireless
zones &

change the loop number or "C" to copy the previous zones serial number. Make

changes as needed.

<US.Homes.Security@xxxxxxxxx> wrote in message
news:1166817921.921333.13760@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>
> Roland Moore wrote:
>> Okay, you decided to have some Christams fun early?
>> If you want to pull my leg I'll play along.
>> So you don't understand decimal versus HEX values?
>> null,1,2,3,4,5,6,7,8,9,0,11,12,13,14,15
>> null,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F
>> If you use contact ID it doesn't matter what you put in.
>> It just needs an input to tell it to send the associated code.
>> Hmm I'm confused. You don't seem to know the phone number for Honeywell
>> trainer assigned to your region.
>>
>> <US.Homes.Security@xxxxxxxxx> wrote in message
>> news:1166815282.142275.40630@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>> > Hmm I'm confused, I'm reading a vista 10se manual and am tring to
>> > understand a few things involved  . Reading page 20 . I'm given the
>> > example of {1}{2} for "C". It states refer to  System Communication
>> > section for complete info. Now mind you I probably am just not
>> > comprehending the manual so bear with me please. Page 64 System
>> > Communication- ok  I'm having trouble understanding these pages - I
>> > have a full grasp of the 3 beggining paragraphs  and can decipher  most
>> > of the tables but I'm not seeing an area that states 12=C  are they
>> > referring to page 68  the box "To program system status and restore
>> > report codes "and if o that seems to be an example for  3+1 or 4+1
>> > standard format correct?    well if thats the case and I'm not totally
>> > confused if i were to use Contact ID ---no i must be wrong on the how
>> > to input the report code page in the manual it says nothing concerning
>> > using # and 12 as it does on page 68 .. I could use some help where did
>> > they get the 12=C wheres that table..
>> > thanks signed a little confused. Thanks any help would be much
>> > appreciated.
>> >
> I  am very new to the alarms - I am familiar with the hex / dec system
> but just wasnt seeing the big picture i figured it would have been
> spelled out more in the manual so I am very grateful for the
> information.
> question If using the manuals ie. report code of 03C   03=Perimeter
> what would the C signify?  I'm a junior installer and dont do any
> installing for lack of knowledge.
>