Re: More VOIP/Digital Voice

["Mark Leuck" <m..leuck@xxxxxxxxxxx>]

"Roland Moore" <roland@xxxxxxxxxxxx> wrote in message
news:KX8eh.2024$qp1.906@xxxxxxxxxxxxxxxxxxxxxxx
> tWW of a 9600?
> STANDBY-BATTERY CALCULATION WORKSHEET
>
> > Uh Huh!  Let's see now.
> >
> > What's the current draw of 8 EZM keypads and 8 motion detectors?  And
> > what's the max Aux current of a 9600?
>
>
> Let's do the arithmetic!

9600 = 750ma  2A alarm output

RP1CAe2 Alpha = 100ma

standard motion 30 to 50ma

thats all you had to say jeez


> Use the procedure given below to determine the required standby battery
> capacity in Ampere-Hours (AH). NOTE: It is not totally accurate
>
> to merely multiply the combined standby current (in amperes) by the
standby
> time (in hours) to obtain the battery capacity (in
>
> ampere-hours), since other factors (control-panel charging capabilities,
> temperature, battery condition, etc.) affect battery operation.
>
> The following calculations will yield the theoretical minimum required
> capacity.
>
> 1. STANDBY CURRENT
>
> STANDBY CURRENT (Amps)
>
> DEVICE QTY EACH TOTAL
>
> GEM-P9600 1 X 0.120 =
>
> GEM-EZM4/8 X 0.050 =
>
> GEM-EZM8 X 0.050 =
>
> GEM-RP1CAe2/
>
> GEM-K1CA
>
> X 0.100 =
>
> GEM-RP1CAe2/
>
> GEM-K1CA (1)
>
> X 0.035 =
>
> GEM-RP2ASe2/
>
> GEM-K2AS
>
> X 0.065 =
>
> GEM-RP2ASe2/
>
> GEM-K2AS (2)
>
> X 0.020 =
>
> GEM-RP3DGTL/
>
> GEM-K3DGTL
>
> X 0.050 =
>
> RM3008 (3) X 0.040 =
>
> X =
>
> X =
>
> TOTAL STANDBY CURRENT
>
> Amps
>
> (1) Alarm current drawn in alarm.
>
> (2) Alarm Time in Hours. Example: For a 15 minute alarm timeout, Alarm
Time
> =
>
> 15/60 = 0.25.
>
> 2. ALARM CURRENT
>
> ALARM CURRENT (Amps)
>
> DEVICE QTY EACH TOTAL
>
> TOTAL STANDBY CURRENT (from Box 1, above)
>
> GEM-P9600 (1) X 0.100 = 0.100
>
> BELLS X =
>
> STROBES X =
>
> HORNS / STROBES X =
>
> X =
>
> X =
>
> Amps
>
> TOTAL ALARM CURRENT
>
> (1) Backlighting disabled (cut Jumpers W1, W2 & W3).
>
> (2) Backlighting disabled (cut Jumpers A, B & C).
>
> (4) Standby Time in Hours.
>
> (Box 1)
>
> X
>
> Hours
>
> =
>
> AH.
>
> (Standby Time)(4) (Box 2)
>
> X
>
> Hours
>
> =
>
> AH.
>
> (Alarm Time)(2) (Box 3)
>
> MINIMUM REQUIRED BATTERY CAPACITY = BOX 2 + BOX
>
> AH.
>
> "Jim" <alarminex@xxxxxxx> wrote in message
> news:1165557046.502274.299300@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> >
> > Robert L Bass wrote:
> >> >> Really?  And the Caddx (Networx) part
> >> >> number for the keypad with built-in
> >> >> 4-zone expander is???
> >> >
> >> > don't need it with zone doubling.
> >>
> >> Pardon me.  I guess I'm not making myself clear.  Both systems offer
lots
> >> of zone capability.  Both offer multiple partitions.  Both
> >> offer remote expanders.  Napco alone offers a keypad with built-in four
> >> zone expander which in many cases is all you need for a
> >> remote partition.  In large, residential applications and many
mid-sized
> >> commercial jobs, that's all you need for a remote
> >> structure.
> >>
> >> I've protected a number of foundries which had been converted into
> >> multiple tenant, commercial space.  In several of these we used
> >> the Napco Gemini P9600 control with 8 keypads, one per partition.  One
> >> place in particular was especially easy due to its layout.
> >> Stretched along two ~200 foot corridors were a series of office
modules.
> >> Each had two doors and one motion detector.  We daisy
> >> chained an 18/2 cable for detector power and another 18/4 for the
> >> keypads.  There were 16 units in the building.  Twp Napco P9600
> >> systems protected all of them.
> >
> > Uh Huh!  Let's see now.
> >
> > What's the current draw of 8 EZM keypads and 8 motion detectors?  And
> > what's the max Aux current of a 9600?
> >
>
>