[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Adding Ademco 5804BD

Subject: Adding Ademco 5804BD
From: "Peter Wells" <rth864@xxxxxxxxx>
Date: Fri, 13 May 2005 19:56:31 GMT
Newsgroups: alt.security.alarms

I'm having trouble adding a 5804BD to my home system (Vista 20).  I
installed the 5800TM and programmed the House ID into both the panel and the
remote - this seemed to work fine and the unit gives me a good status.  Then
from inside Ademco's Compass software I added two zones with the loops info
and remote wireless ID for the A & B buttons, one to arm-away and the other
to disarm.  The panel took the commands but pressing the buttons doesn't
operate the panel.

Any ideas?

Thanks in advance,

Peter

Follow-Ups:
- Re: Adding Ademco 5804BD
  - From: Crash Gordon®

Prev by Message: Re: Radionics D8112 passcode reset possible?
Next by Message: Re: Want to move Brinks keypad
Previous by thread: Re: need advice on home alarm
Next by thread: Re: Adding Ademco 5804BD
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home