[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: DSC Maxsys PC 4020 Reporting probs.

Subject: Re: DSC Maxsys PC 4020 Reporting probs.
From: "Anonymoose" <none@xxxxxxxxxxxxx>
Date: Mon, 02 May 2005 02:57:30 GMT
Newsgroups: alt.security.alarms
References: <ycwce.6$i1.1@xxxxxxxxxxxxxxxxxxxxxx> <AxBce.1167792$8l.1032540@pd7tw1no> <cACce.173$D91.55@fed1read01> <gJudnVKBjflylu7fRVn-qw@xxxxxxxxxxx> <29Pce.1176777$8l.588742@pd7tw1no> <JrWdnWbLpJ5nQu7fRVn-tg@xxxxxxxxxxx> <T_fde.1187$i1.1065@xxxxxxxxxxxxxxxxxxxxxx> <sIudnXm3YLKuCOjfRVn-jw@xxxxxxxxxxx>

If there was a service visit by Simplex, I wasn't informed of it but that
very well could be. Also, this panel has a line specifically dedicated to
it, nothing else is on it.

"Robert L. Bass" <robertlbass@xxxxxxxxxxx> wrote in message
news:sIudnXm3YLKuCOjfRVn-jw@xxxxxxxxxxxxxx
>> The system used to work fine. reported all alarms and communicated
>> flawlessly with the receiver until about a month ago when it all of the
>> sudden stopped.
>
> Did the failure immediately follow a service visit?  No flame, friend.
> I'm just wondering what might have happened about the time it failed.
> Also, has anyone mentioned DSL?  If not, was DSL installed recently?
>
> --
>
> Regards,
> Robert L Bass
>
> =============================>
> Bass Home Electronics
> 2291 Pine View Circle
> Sarasota · Florida · 34231
> 877-722-8900 Sales & Tech Support
> http://www.bassburglaralarms.com
> =============================>
>

References:
- Re: DSC Maxsys PC 4020 Reporting probs.
  - From: Anonymoose
- Re: DSC Maxsys PC 4020 Reporting probs.
  - From: Robert L. Bass

Prev by Message: Re: NFPA's Creation of Security Standards/Codes
Next by Message: Re: Compass - direct connect?
Previous by thread: Re: DSC Maxsys PC 4020 Reporting probs.
Next by thread: Re: DSC Maxsys PC 4020 Reporting probs.
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home