Re: Napco Wireless Gem-PIR

["Russell Brill" <russwbrill@xxxxxxxxxxxxx>]

Wireless PIR's fall asleep for a couple of minutes after each activation to
conserve the batteries........ Regards, Russ

"Crash Gordon®" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
news:DDKve.76$FR6.45714@xxxxxxxxxxxxxxxxxx
I don't use the Gem...but

Depends on how they are set, what they are looking at, room activity when
testing, mounting height,...etc. Read the directions on what the settings
should be. If you're going by the led stay out of the room for 5 minutes or
so then walk test it.


"jjsmd" <jjsmd@xxxxxxxxx> wrote in message
news:1119840321.194379.254320@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
| I am trying to use the Napco Gem-PIR with my 9600 board, and I have the
| following question:
|
| When motion occurs at my other motion detectors(wired) the board very
| quickly detects  zone Open and then zone Closed, and there does not see
| to be a period where the next motion is not detected for a period of
| time. In other words if someone is walking back and forth 4 or 5 times
| it will register Open,closed,open,closed,open  etc...
|
| On the other hand with the gem-pir after the first Open and Closed it
| seems to have a down time where the next motion doesn't register for
| quite a while. Is this inherent in the Gem-Pir , is it able to be
| modified?
|
| Any help appreciated.
|