Re: Napco Wireless Gem-PIR

[Crash Gordon® <webmaster@xxxxxxxxxxxxxxxxxxxxx>]

I don't use the Gem...but

Depends on how they are set, what they are looking at, room activity =
when testing, mounting height,...etc. Read the directions on what the =
settings should be. If you're going by the led stay out of the room for =
5 minutes or so then walk test it.


"jjsmd" <jjsmd@xxxxxxxxx> wrote in message =
news:1119840321.194379.254320@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
| I am trying to use the Napco Gem-PIR with my 9600 board, and I have =
the
| following question:
|=20
| When motion occurs at my other motion detectors(wired) the board very
| quickly detects  zone Open and then zone Closed, and there does not =
see
| to be a period where the next motion is not detected for a period of
| time. In other words if someone is walking back and forth 4 or 5 times
| it will register Open,closed,open,closed,open  etc...
|=20
| On the other hand with the gem-pir after the first Open and Closed it
| seems to have a down time where the next motion doesn't register for
| quite a while. Is this inherent in the Gem-Pir , is it able to be
| modified?=20
|=20
| Any help appreciated.
|