[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Vista 10SE powering up in STAY mode

Subject: Vista 10SE powering up in STAY mode
From: "Chris Lewis" <TopManMe@xxxxxxxxxxxxx>
Date: Tue, 31 May 2005 21:08:21 -0400
Newsgroups: alt.security.alarms

Hi, all

I am trying to help out a friend. His monitoring contract ran out on a
Brinks system that he had installed when purchasing the house two years ago.
Brinks removed a Vista 10SE, which I now want to reinstall.

It checks out okay, and the programming seems adequate for his use. I found
(purchased) the instructions for putting in a new installer's code. It will
accept the code, and operate just fine, UNTIL the power is removed (AC and
battery). It will always come up in "STAY" mode and the new code is lost.

How do I get around this one?

Any help would be greatly appreciated!

Follow-Ups:
- Re: Vista 10SE powering up in STAY mode
  - From: Russ Brill
- Re: Vista 10SE powering up in STAY mode
  - From: Crash Gordon®
- Re: Vista 10SE powering up in STAY mode
  - From: Mark Leuck
- Re: Vista 10SE powering up in STAY mode
  - From: Bossman
- Re: Vista 10SE powering up in STAY mode
  - From: Jim Rojas

Prev by Message: Re: Window Security Recommendations
Next by Message: Re: Anybody else had dealings with Jim Rojas ??
Previous by thread: Re: Seeeking link for HAI OmniPro II Web-link software.
Next by thread: Re: Vista 10SE powering up in STAY mode
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home