Re: 236i2 programmers manual

["Paul" <someones-father-@xxxxxxxxxxx>]

It is a very average panel, and if the installer lockout has been
programmed, then you wont be able to default it unless you have a version 1
chip.

Try depowering and repowering first. Depending on how its been programmed,
you may be lucky and it might be back at default.

Paul

"Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
news:gs-dnTTAQ5f_uiPfRVn-sg@xxxxxxxxxxxxxx
> You are better off junking it, I would normally suggest making it a boat
> anchor however the lack of features on C&K boards in general means it
> won't
> be very good in that application either
>
> "Rob" <rob_adel@xxxxxxxxx> wrote in message
> news:1119751245.521510.122290@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>> Hi,
>>
>> I am after a programmers manual for the above system.
>>
>> Any help would be appreciated.  Also any information on setting the
>> unit to factory defaults.
>>
>> Thanks Rob
>>
>
>