[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Need instructions to program zones into Regency 4720

Subject: Re: Need instructions to program zones into Regency 4720
From: "Frank Olson" <feolson@xxxxxxxxxx>
Date: Wed, 31 Aug 2005 16:39:49 GMT
Newsgroups: alt.security.alarms
References: <4315273c$0$13532$5ec1c3@xxxxxxxxxxxxxxxxxxx>

"Bill" <simard@xxxxxxxxxxxx> wrote in message
news:4315273c$0$13532$5ec1c3@xxxxxxxxxxxxxxxxxxxxxx
> Hello again,
>
> I have to reprogram my system and add back all the zones.  Does anyone
> have instructions for adding zones?
> I have the 4724 board installed, so I have menus on the keypad not the hex
> programming.
> I just need to know how to get into the programming menus & what to enter
> once I get in there.
>
> Thanks everyone.


Programming this thing from the keypad is a PITA.  I've got the programming
manual kicking around.  Email me with your fax number and I'll send it to
you.  feolson at shaw dot ca.  No spaces.

References:
- Need instructions to program zones into Regency 4720
  - From: Bill

Prev by Message: Re: THINKERS ANONYMOUS
Next by Message: Re: CCTV Cameras
Previous by thread: Need instructions to program zones into Regency 4720
Next by thread: how to set up cctv network?
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home