[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Adding a third keypad to a Caddx NX-8, wiring help requested!



Parallel or series it doesn't mater three conductor.
How far is the run? and you need to set the keypad in programming.


"brim" <bcruze@xxxxxxxxx> wrote in message
news:1124325989.739589.202500@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> I have a perfectly working Caddx NX-8 system with two keypads that I'd
> like to add a third keypad to and I have a question about the wiring.
> This system came installed with my house but I think I have the wiring
> figured out.  Both keypads are wired directly back to the NX-8 board.
> Now, I'm assuming I could add the third keypad's wiring back to the
> board but it would be much easier for me to tap into one of the
> existing keypad's wiring.
>
> Is it possible for these keypads to be wired in series (the
> wiring diagram in the manual seems to suggest so)?  Or will I have to
> run a separate wire bbck to the panel?  Thanks for your help!
>




alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home