[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: x10 couple/repeater



Check "Uncle Phil" for an article on this, but as I recall; use a amplifier
coupler on each service and connect the two services together with two phase
couplers.

"cel" <cel@xxxxxxxxxx> wrote in message
news:p65Ng.321$TV3.241@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>I don't know if there are any good solutions to how to distribute x10
>signal
> in a home with two separate 200 amp 220v services from the meter. I have
> one
> leviton hca02-10e. Now that my service has be upgraded to 400 amps the
> signal is very weak in some locations leading to errors. I thought I would
> have one 400 amp service, with 2 hot leads and a neutral, but instead I
> got
> twi 200 amp services with 4 hot leads! x10 signal have to couple through
> the
> power company's transformer from one 200 amp service to the other one.
>
> Any ideas on the right solution for this?
>
> cel
>
>




alt.home.automation Main Index | alt.home.automation Thread Index | alt.home.automation Home | Archives Home