[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: X10 FLUORESCENT LIGHTS



I have worked on these systems before.  The switching comes from a
signal at the "zero crossing " of the 60hz power.  Anything that puts
noise on the line may interfere with the signal.  They make filters to
suck out harmonics, and do a fairly good job of it.
John Evans





On Tue, 25 Oct 2005 12:52:46 -0200, "Flavio Silva"
<flavio_ernesto143@xxxxxxxxxxx> wrote:

>**** Post for FREE via your newsreader at post.usenet.com ****
>
>Guys,
>
>My X10 system works fine up to I install a fluorescent light. It makes the
>other lights don't respond to remote commands.
>
>What should I do, pls?
>
>Thanks for any info!
>
>Flavio
>
>
>
>-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> *** Usenet.com - The #1 Usenet Newsgroup Service on The Planet! ***
>                      http://www.usenet.com
>Unlimited Download - 19 Seperate Servers - 90,000 groups - Uncensored
>-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=



alt.home.automation Main Index | alt.home.automation Thread Index | alt.home.automation Home | Archives Home