Re: - update Re: having trouble getting xPL comfort to set outputs

["Frank Mc Alinden" <frankmc@xxxxxxxxxxxxxxxx>]

Hi Adrian

Sometimes when i create a Determinator they wont work and what i have found
works sometimes is after creating the Determinator i click on the refresh
icon and it then works.......

HTH
Frank

----- Original Message -----
From: Adrian
To: ukha_xpl@xxxxxxx
Sent: Saturday, October 01, 2005 5:12 AM
Subject: Re: [ukha_xpl] - update Re: having trouble getting xPL comfort to
set outputs


John/All

have found some interesting stuff in relation to this. Have managed to
get a determinator to trigger the outputs, previous ones didnt work,
only difference i saw was the name of the device was different (in this
case jackson1 vs jackson) - i did have initial problems changing the
name on this so this may have attributed to it

however if i try and click on the device (comfort) and choose to set an
output, it fails.  Heres the 2 entries from the monitor (as both the
determinator and trying it directly use a xpl message)

doesnt work     device=2
type=output
current=Off
does work       device=2
type=output
current=off

and the difference is the 'Off' has a captial O, the other is all lower
case, otherwise the xpl message is identical

Adrian





Adrian wrote:

>John
>
>Comfort is working fine, i've run up wizcomfort (had to shutdown
xplcomfort
>as it uses same serial port) and can set the outputs from there with
success
>(i have a piezo soundbomb on output 1 so i know when it works, so do
the
>cats)
>
>I havent tried arming the system via xpl, will try this afternoon. I
also
>pump x10 through comfort (as only x10 interface i have) which works
fine.
>
>Adrian
>
>--------- Original Message --------
>From: ukha_xpl@xxxxxxx
>To: ukha_xpl@xxxxxxx <ukha_xpl@xxxxxxx>
>Subject: RE: [ukha_xpl] Re: having trouble getting xPL comfort to set
>outputs
>Date: 30/09/05 05:48
>
>
>
>>Hi,
>>
>>Apologies for missing this thread!
>>
>>&gt; &gt;So can anyone confirm that their &quot;set
output&quot; works
>>
>>
>with xPLComfort?
>
>
>>Yes - they're working fine here.
>>
>>If you're seeing trigger messages from Comfort then the xPL Comfort
app
>>must be logging into Comfort and communicating with the UCM fine.
>>
>>Are you sure that the outputs are working? I.e. do they work if you
>>switch them on/off directly via a comfort response?
>>
>>Do any other xPL messages get through to Comfort? E.g. to arm the
alarm
>>system etc.
>>
>>Regards,
>>
>>John
>>
>>
>>
>>




xPL Links: http://www.xplproject.org.uk http://www.xplhal.com http://www.xpl.myby.co.uk
To Post a Message: ukha_xpl@xxxxxxx
To Subscribe:  ukha_xpl-subscribe@xxxxxxx
To Unsubscribe:  ukha_xpl-unsubscribe@xxxxxxx



------------------------------------------------------------------------------
YAHOO! GROUPS LINKS

a..  Visit your group "ukha_xpl" on the web.

b..  To unsubscribe from this group, send an email to:
ukha_xpl-unsubscribe@xxxxxxx

c..  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


------------------------------------------------------------------------------



[Non-text portions of this message have been removed]