The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: xPL-Homevision


  • Subject: Re: xPL-Homevision
  • From: Steve Cooper
  • Date: Sat, 24 Jan 2004 11:39:00 +0000


> It looks like your app is receiving the xpl message but its not
> transmitting it.....

Are you getting a control.basic command back.

To run a macro you need a xpl message like

control.basic
{
device=0
type=macro
current=do
}

If you get the latest gshed plugin and right click on the device
there is run a macro as an option. Put the number of macro in first
box then DO in the new value box.

Also check the xpl_HV app in debug mode you should see something
like ,Oxx00 come up in the top left hand box on the right and then
quickly disappear as it's sent to HV.

S.






xPL Main Index | xPL Thread Index | xPL Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.