The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: More homeseer level issues.


  • Subject: RE: More homeseer level issues.
  • From: "Ian Davidson" <ian@xxxxxxxxxxxxxxxx>
  • Date: Sun, 5 Aug 2007 18:19:35 +0100

Hi Kevin,

I have just tested this and yes if you set HS to a level then the on/off
commands from Xap change the status correctly but as soon as you use the
HS screen to set the device on or off it does not update any longer.
Very odd but would seem to be an HS problem and not a plug in problem. I
would like the status screen to display correctly but if the scripts act
on the device correctly then that is the most important.

My .info msg sends level = 0/100 but my .event only sent the level = 0
so I'll change that when I next re-flash it, I may as well keep it
right.

Thanks


Ian


-----Original Message-----
From: xAP_developer@xxxxxxx
[mailto:xAP_developer@xxxxxxx] On
Behalf Of Kevin Hawkins
Sent: 05 August 2007 12:45
To: Ian
Subject: Re: [xAP_developer] More homeseer level issues.

I notice that if the level is first set from the dropdown - causing HS
to display something like "Dim, 50%" then later incoming xAP
events from

say a  switch activation do update the status display correctly. It
seems to put HS into a mode such that  'what' is displayed in the status

column is appropriate.

K


Kevin Hawkins wrote:
>  I am unsure if it is HomeSeer
> or the plugin but it is very annoying as it doesn't seem to work very
> well.





xAP_Development Main Index | xAP_Development Thread Index | xAP_Development Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.