Re: xAP embedded CallerID device

["max barker" <vworpi@xxxxxxxxxxxxxx>]

Do you have a link to the manufacturers website for these? It sounds
promising for an embedded Comfort connector.

Max

2008/6/30 Kevin Hawkins <yahoogroupskh@xxxxxxx>:
> Sorry - just received this post !! .
>
> This was something I did that uses an off the shelf embedded device
> - (circa =A350) nicely cased with a serial port. I wrote some xAP code
> and I had my Meteor attached to it directly. It does much the same as
> xAPTel in the Meteor context - ie it doesn't offer the Skype options
or
> the ability to dial etc but provides a full set of call progress
> messages and the outgoing dialled digit detection too. Actually as
> each digit is reported as it is dialled you can use specific sequences
> to trigger xAP events should you want eg turn all your lights off by
> dialling #8 or something - turn them on if dialling 999.
>
> The devices are programmed in a basic style language so you could use
> them for anything really - and there's a quad port versions too.
Anyone
> is welcome to my xAP source code... it's dead easy to then just add in
> serial handling for your own XYZ device.
>
> I now have a quad port handling my alarm, my AV amplifer , the Meteor
> and a video/audio matrix switcher. Single port units are around =A350
> from memory and the cased quad ports around =A3120. These are
available
> as just boards for considerably less.
>
> Kevin
>
> PS Whilst you're there Kevin I have been revisiting my xAP BSC
Framework
> code that I think you may have used in a couple of projects . I've
> found a couple of ignificant things that are wrong with it so if you
> have used that code then you probably have the same issues ! A few of
> the issues were due to the transition from Patricks OCX to J's
Intranet
> OCX. Give us a shout if you are still actively using it,
>
> turner228 wrote:
>>
>> "and I'm using the xAP embedded CallerID device" ??
>>
>> Do tell.....
>>
>> Kevin T
>>
>>
>
>=20
>

------------------------------------