The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: How suitable would Xap be for monitoring Gas + Electric?


  • Subject: Re: How suitable would Xap be for monitoring Gas + Electric?
  • From: "Gary" <questuk1@xxxxxxxxxxx>
  • Date: Wed, 10 Dec 2008 21:34:21 -0000

Hi,

OK thanks James, that's given me a much clearer view of Xap and its uses.

Regards


Gary

--- In xap_automation@xxxxxxx, James Traynor
<james.traynor@...> wrote:
>
> Hi,
>
> It really comes down to what you want to do with the data, but the
short
> answer is yes it should be part of the system.  If all you are doing
is
> logging data to a database, and everything you are going to use the
data
> with is on teh pc connected to the PIC, then xAP isn't going to help
you
> much. However I would imagine you want to share the data, display the
> data, maybe even IM the data or speak the data. That's really where
xAP
> will help you as alot of the connectors are done. I don't know about
gas
> but there is an app to xAP enable a currentcost electricity monitor
> which will be probably be useful.
> The .net framework will give you all the xAP elements to your
> application you will need to send and receive messages. Floorplan
could
> be used to log data and graph it too with some scripting.  Many
> possibilities, mainly depends on platform and what you want to display
> where. Remember though that xAP is a protocol, so is ideal to get info
> from A to B, well A to everywhere really, but you still need apps
> for the receiving and sending!
>
> James
>
> Gary wrote:
> >
> > Hi,
> >
> > I haven't used Xap yet, but I am intending to monitor my Gas
usage per
> > minute and eventually my electric. I would like real time data
and
> > historical and it would be nice to have graphs.
> >
> > I had considered writing some code in Visual Basic 2008 express,
but
> > am wondering if all the hard work has been done for me and use
Xap?
> >
> > The data will eventually be sent into my PC using RS232 or USB
via a
> > pic micro. But for initial trial will most probably use parallel
port
> > and just count the pulses.
> >
> > How suitable is Xap for this?
> >
> > Any ideas and thoughts welcome?
> >
> > Regards Gary
> >
> >
>



------------------------------------


xAP_Automation Main Index | xAP_Automation Thread Index | xAP_Automation Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.