Re: xAPTel not seeing outgoing calls

["slashcomfort" <yahoo@xxxxxxxxxxxxxx>]

found the issue, looks like its the dect phones it doesnt like.
tried a normal phone, works fine. Tried dect phone, doesnt want to
know - you can hear the dect phone sending the tones, why would ther
meteor not pick it up, too quick?

--- In xap_automation@xxxxxxx, Kevin Hawkins <lists@u...>
wrote:
> OOOPS  speed should be 1200 baud not 2400 baud !
>
> -also I assume you are using DTMF (tone) dialling and not
rotary/pulse  ?
>
> Kevin
>
> Kevin Hawkins wrote:
>
> >Hmm curious - maybe there is a model of the Meteor that does not
support
> >DTMF detection for outgoing calls. Is this an older Meteor ?
> >
> >You could tell via opening a Hyperterminal session at 2400baud
8bits
> >noparity 1stop  no flow control to the COM port the Meteor is
connected
> >too. (quit xAPTel first of course) Now when you lift the tel
handset you
> >should see
> >
> >ON-LINE
> >
> >and when you dial a digit you should see the digit displayed..
> >
> >replacing the handset will show OFF-LINE
> >
> >If you see the first ON-LINE message but not the digits then I'm
afraid
> >your Meteor is not reporting the outgoing dialled digits
> >
> >Kevin
> >
> >slashcomfort wrote:
> >
> >
> >
> >>Hi
> >>
> >>just starting installing xap and have installed the latest
xAPTel
> >>(intalled the latest beta3) connected to my Meteor (i assume
the
mk2
> >>as the connectors are not fixed). I all works fine with
incoming
> >>numbers but doesnt register outgoing. (i can see xap messages
from the
> >>unit when making a call but none have the number i've dialed
in
them)
> >>
> >>any ideas? am i doing something wrong?
> >>
> >>thanks in advance
> >>
> >>Ade
>