The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: xAP Asterisk integration



Please ignore this post now... it was sent before James addressed this
very subject.

Gregg

Gregg Liming wrote:

>Kevin Hawkins wrote:
>
>
>
>>Great stuff Ove, and Gregg I wish I could have more input on * and
what
>>should be implemented but I don't as yet use it , but would with a
xAP
>>interface :-)
>>
>>
>>
>>
>Since you have so graciously offered... ;)
>
>I do have one question (or perhaps, just the prelude to a lot more...)
>regarding the treatment of dialing "resources" and their
mapping to
>source or target names.  In a pbx system (which * implements), it is
>often logical to think of a set of sending or receiving
"channels".  In
>some sense, your treatment of PSTN or Skype is such an example.
>Further, it is often the case that a channel be specifically identified
>or addressable.  In the PSTN world, these are hard, physical lines.  In
>asterisk, the use of channel banks, and VoIP providers opens this up to
>many more options.
>
>I notice that xAP Switchboard allows some mapping of source to
"line".
>That caused me to begin thinking about how this might be implemented
and
>specifically, thinking about subaddressing.  I know subaddressing is
>used for BSC; is it restricted to BSC or is it appropriate for other
>schemas (such as the telephony ones)?  The motivation for considering
>subaddressing is that I had rather assumed that the asterisk xAP app
>would occupy the primary address (source or target).  So, to send
>message to some phone managed by asterisk (for example, to initiate a
>call outward), the subaddress might be something like sip.2001 (where
>sip is the logical channel and 2001 is the "extension"). 
Likewise, if a
>Incoming.CallWithCID is sent, it would be nice to know what inbound
line
>is receiving the call.  Since xAP switchboard seems to associate
sources
>w/ lines, then subaddressing seemed like a natural path.  Am I off-base
>here?  If not, does xAP Switchboard handle subaddressing for line
>association?
>
>Gregg
>
>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>





xAP_Automation Main Index | xAP_Automation Thread Index | xAP_Automation Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.