[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Somfy IO-homecontrol
--_000_DB7PR06MB4347A3140BDCB051E279C251A8940DB7PR06MB4347eurp_
Content-Type: text/plain; charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
I might have some KLF100=92s for sale if interested? I took them out of my
=
old house where I had around 8 windows and blinds controlled by comfort
etc=
through them.
________________________________
From: ukha_d@xxxxxxx <ukha_d@xxxxxxx> on behalf of Richard =
Challis richard@xxxxxxx [ukha_d] <ukha_d@xxxxxxx>
Sent: Tuesday, May 22, 2018 10:08:17 PM
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Somfy IO-homecontrol
Hi Paul,
IO Homecontrol is also used by Velux. it's 868Mhz as well.
The interface I have for remote control by Idratek is the Velux
interface KLF100, it's pretty crude with a two sets of contact inputs
that trigger the Velux windows to open and close.
In the manual for the KLF-100 it does talk about blinds so it may work.
http://installers.velux.co.uk/V-GB/Installers.nsf/KLF%20100%20-%20451719-01=
09.pdf?OpenFileResource
Just been googling and found the KLF-200, this apparently has 5 sets
of dry contacts and a web interface, it looks very crude but might be
another route to control.
I hope this is of use?
All the best
Richard
On 22 May 2018 at 18:04, Paul Gordon paul_gordon@xxxxxxx [ukha_d]
<ukha_d@xxxxxxx> wrote:
> Hey peeps... I just had a new motorised awning fitted, which has come
wit=
h but a single remote handset, plus one vibration sensor fitted as wind
det=
ector...
>
> The handset is branded Somfy IO-homecontrol and the instructions - in
8 l=
anguages... none of them mine... state it runs on 868.95 MHz...
>
> I=92d love to be able to get more automated control over it... ideally
th=
rough Comfort if possible...
>
> Since I only have 1 handset, I don=92t want to hack that about...
>
> Is there any RF interface I can use to replicate the signals from the
han=
dset, triggered through the HA system?
>
> Cheers!
>
> Paul G
>
> Sent from my iPhone
>
> ------------------------------------
> Posted by: Paul Gordon <paul_gordon@xxxxxxx>
> ------------------------------------
>
>
>
> ------------------------------------
>
> Yahoo Groups Links
>
>
>
------------------------------------
Posted by: Richard Challis <richard@xxxxxxx>
------------------------------------
------------------------------------
Yahoo Groups Links
--_000_DB7PR06MB4347A3140BDCB051E279C251A8940DB7PR06MB4347eurp_
Content-Type: text/html; charset=Windows-1252
Content-Transfer-Encoding: quoted-printable
<head>
<style type=3D"text/css">
<!--
/* start of attachment style */
.ygrp-photo-title{
clear: both;
font-size: smaller;
height: 15px;
overflow: hidden;
text-align: center;
width: 75px;
}
div.ygrp-photo{
background-position: center;
background-repeat: no-repeat;
background-color: white;
border: 1px solid black;
height: 62px;
width: 62px;
}
div.photo-title=20
a,
div.photo-title a:active,
div.photo-title a:hover,
div.photo-title a:visited {
text-decoration: none;=20
}
div.attach-table div.attach-row {
clear: both;
}
div.attach-table div.attach-row div {
float: left;
/* margin: 2px;*/
}
p {
clear: both;
padding: 15px 0 3px 0;
overflow: hidden;
}
div.ygrp-file {
width: 30px;
valign: middle;
}
div.attach-table div.attach-row div div a {
text-decoration: none;
}
div.attach-table div.attach-row div div span {
font-weight: normal;
}
div.ygrp-file-title {
font-weight: bold;
}
/* end of attachment style */
-->
</style>
</head>
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html;
charset=3DWindows-1=
252">
<meta name=3D"Generator" content=3D"Microsoft Exchange
Server">
<!-- converted from text --><style><!-- .EmailQuote {
margin-left: 1pt; pad=
ding-left: 4pt; border-left: #800000 2px solid; } --></style>
</head>
<body>
<!-- **begin egp html banner** -->
<br><br>
<!-- **end egp html banner** -->
<div>
<div id=3D"x_compose-container" itemscope=3D""
itemtype=3D"https://schema.o=
rg/EmailMessage" style=3D"direction:ltr">
<span itemprop=3D"creator" itemscope=3D""
itemtype=3D"https://schema.org/Or=
ganization"><span
itemprop=3D"name"></span></span>
<div>
<div>
<div style=3D"direction:ltr">I might have some KLF100=92s
for sale if inter=
ested? I took them out of my old house where I had around 8 windows and
bli=
nds controlled by comfort etc through them.
</div>
</div>
<div><br>
</div>
<div class=3D"x_acompli_signature"></div>
</div>
</div>
<hr tabindex=3D"-1" style=3D"display:inline-block;
width:98%">
<div id=3D"x_divRplyFwdMsg" dir=3D"ltr"><font
face=3D"Calibri, sans-serif" =
color=3D"#000000"
style=3D"font-size:11pt"><b>From:</b>
ukha_d@yahoogroups.=
com <ukha_d@xxxxxxx> on behalf of Richard Challis
richard@sub=
terranea.org.uk [ukha_d] <ukha_d@xxxxxxx><br>
<b>Sent:</b> Tuesday, May 22, 2018 10:08:17 PM<br>
<b>To:</b> ukha_d@xxxxxxx<br>
<b>Subject:</b> Re: [ukha_d] Somfy IO-homecontrol</font>
<div> </div>
</div>
</div>
<font size=3D"2"><span
style=3D"font-size:11pt;">
<div class=3D"PlainText">Hi Paul,<br>
<br>
IO Homecontrol is also used by Velux. it's 868Mhz as well.<br>
<br>
The interface I have for remote control by Idratek is the Velux<br>
interface KLF100, it's pretty crude with a two sets of contact
inputs<br>
that trigger the Velux windows to open and close.<br>
<br>
In the manual for the KLF-100 it does talk about blinds so it may
work.<br>
<br>
<a href=3D"http://installers.velux.co.uk/V-GB/Installers.nsf/KLF%20100%20-%=
20451719-0109.pdf?OpenFileResource">http://installers.velux.co.uk/V-GB/Inst=
allers.nsf/KLF%20100%20-%20451719-0109.pdf?OpenFileResource</a><br>
<br>
Just been googling and found the KLF-200, this apparently has 5
sets<br>
of dry contacts and a web interface, it looks very crude but might
be<br>
another route to control.<br>
<br>
I hope this is of use?<br>
<br>
All the best<br>
<br>
Richard<br>
<br>
On 22 May 2018 at 18:04, Paul Gordon paul_gordon@xxxxxxx [ukha_d]<br>
<ukha_d@xxxxxxx> wrote:<br>
> Hey peeps... I just had a new motorised awning fitted, which has
come =
with but a single remote handset, plus one vibration sensor fitted as wind
=
detector...<br>
><br>
> The handset is branded Somfy IO-homecontrol and the instructions -
in =
8 languages... none of them mine... state it runs on 868.95
MHz...<br>
><br>
> I=92d love to be able to get more automated control over it...
ideally=
through Comfort if possible...<br>
><br>
> Since I only have 1 handset, I don=92t want to hack that
about...<br>
><br>
> Is there any RF interface I can use to replicate the signals from
the =
handset, triggered through the HA system?<br>
><br>
> Cheers!<br>
><br>
> Paul G<br>
><br>
> Sent from my iPhone<br>
><br>
> ------------------------------------<br>
> Posted by: Paul Gordon
<paul_gordon@xxxxxxx><br>
> ------------------------------------<br>
><br>
><br>
><br>
> ------------------------------------<br>
><br>
> Yahoo Groups Links<br>
><br>
><br>
><br>
<br>
<br>
------------------------------------<br>
Posted by: Richard Challis <richard@xxxxxxx><br>
------------------------------------<br>
<br>
<*> Join the Automated Home Forums<br>
<a href=3D"http://www.automatedhome.co.uk/vbulleti=
n/">http://www.automatedhome.co.uk/vbulletin/</a><br>
<br>
<*> UKHA_D Mailing list in association with:<br>
<a href=3D"http://www.automatedhome.co.uk";>http://=
www.automatedhome.co.uk</a><br>
<br>
<br>
<br>
------------------------------------<br>
<br>
Yahoo Groups Links<br>
<br>
<*> To visit your group on the web, go to:<br>
<a href=3D"http://groups.yahoo.com/group/ukha_d/";>http:/=
/groups.yahoo.com/group/ukha_d/</a><br>
<br>
<*> Your email settings:<br>
Individual Email Traditional<br>
<br>
<*> To change settings online go to:<br>
<a href=3D"http://groups.yahoo.com/group/ukha_d/join";>ht=
tp://groups.yahoo.com/group/ukha_d/join</a><br>
(Yahoo! ID required)<br>
<br>
<*> To change settings via email:<br>
ukha_d-digest@xxxxxxx <br>
ukha_d-fullfeatured@xxxxxxx<br>
<br>
<*> To unsubscribe from this group, send an email
to:<br>
ukha_d-unsubscribe@xxxxxxx<br>
<br>
<*> Your use of Yahoo Groups is subject to:<br>
<a href=3D"https://info.yahoo.com/legal/us/yahoo/utos/te=
rms/">https://info.yahoo.com/legal/us/yahoo/utos/terms/</a><br>
<br>
</div>
</span></font>
<!-- **begin egp html banner** -->
<br>
<br>
<!-- **end egp html banner** -->
<div width=3D"1" style=3D"color: white; clear:
both;"/>__._,_.___</div>
=20=20=20=20=20=20
=20=20
=20=20=20=20
<div id=3D"fromDMARC" style=3D"clear:both; margin-top:
10px;">
<hr style=3D"height:2px ; border-width:0; color:#E3E3E3; backgroun=
d-color:#E3E3E3;">
Posted by: Paul Gale <paul@xxxxxxx> <hr sty=
le=3D"height:2px ; border-width:0; color:#E3E3E3;
background-color:#E3E3E3;=
">
</div>
<!-- Start Recommendations -->
<!-- End Recommendations -->
<!-- **begin egp html banner** -->
<br><br>
<tt>
<*> Join the Automated Home Forums<BR>
<a href=3D"http://www.automatedhome.co.uk/vbulleti=
n/">http://www.automatedhome.co.uk/vbulletin/</a><BR>
<BR>
<*> UKHA_D Mailing list in association with:<BR>
<a href=3D"http://www.automatedhome.co.uk";>http://=
www.automatedhome.co.uk</a><BR>
<BR>
<BR>
</tt>
<br><br>
<!-- **end egp html banner** -->
<!-- **begin egp html banner** -->
<img src=3D"http://geo.yahoo.com/serv?s=3D97476590/grpId=3D1109639/grpspI=
d=3D1705041992/msgId=3D166391/stime=3D1527024884"
width=3D"1" height=3D"1">=
<br>
<!-- **end egp html banner** -->
=20=20=20=20
<!-- **begin egp html banner** -->
<br>
=20=20=20
=20=20=20=20=20
=20
<!-- **begin egp html banner** -->
<div id=3D"ygrp-vital" style=3D"background-color:
#f2f2f2; font-fam=
ily: Verdana; font-size: 10px; margin-bottom: 10px; padding:
10px;">
<span id=3D"vithd" style=3D"font-weight: bold; color:
#333; text-tr=
ansform: uppercase; "><a href=3D"https://groups.yahoo.com/neo/groups/ukha_d=
/info;_ylc=3DX3oDMTJlbTQwNXR0BF9TAzk3MzU5NzE0BGdycElkAzExMDk2MzkEZ3Jwc3BJZA=
MxNzA1MDQxOTkyBHNlYwN2dGwEc2xrA3ZnaHAEc3RpbWUDMTUyNzAyNDg4NA--"
style=3D"te=
xt-decoration: none;">Visit Your Group</a></span>
<ul style=3D"list-style-type: none; margin: 0; padding: 0; display:
in=
line;">
</ul>
</div>
<div id=3D"ft" style=3D"font-family: Arial; font-size:
11px; margin-top: 5p=
x; padding: 0 2px 0 0; clear: both;">
<a href=3D"https://groups.yahoo.com/neo;_ylc=3DX3oDMTJkb2xtaGpoBF9TAzk3ND=
c2NTkwBGdycElkAzExMDk2MzkEZ3Jwc3BJZAMxNzA1MDQxOTkyBHNlYwNmdHIEc2xrA2dmcARzd=
GltZQMxNTI3MDI0ODg0" style=3D"float: left;"><img
src=3D"http://l.yimg.com/r=
u/static/images/yg/img/email/new_logo/logo-groups-137x15.png"
height=3D"15"=
width=3D"137" alt=3D"Yahoo! Groups"
style=3D"border: 0;"/></a>
<div style=3D"color: #747575; float: right;"> •
<a href=3D"https://i=
nfo.yahoo.com/privacy/us/yahoo/groups/details.html"
style=3D"text-decoratio=
n: none;">Privacy</a> • <a href=3D"mailto:ukha_d-unsubscribe@yahoogrou=
ps.com?subject=3DUnsubscribe" style=3D"text-decoration:
none;">Unsubscribe<=
/a> • <a href=3D"https://info.yahoo.com/legal/us/yahoo/utos/terms/";
st=
yle=3D"text-decoration: none;">Terms of Use</a>
</div>
</div>
<!-- **end egp html banner** -->
</div> <!-- ygrp-msg -->
=20=20=20
<br>
<!-- **end egp html banner** -->
<div style=3D"color: white; clear:
both;"/>__,_._,___</div>
</body>
</html>
--_000_DB7PR06MB4347A3140BDCB051E279C251A8940DB7PR06MB4347eurp_--
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|