[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Gas leak sensor recommendation
--_000_HE1PR08MB03007786BFB122FE273E300A87570HE1PR08MB0300eurp_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Further to this, - and a teensy bit OT - anyone have any knowledge of gas
h=
ob pipe connectors?
I have bought an Ikea domino 2 burner gas hob. It comes with a threaded
mal=
e connector poking out the bottom... there is *absolutely no* data
provided=
in the documentation regarding the size or thread pitch of this connector.=
.. - is that because it's standardised?
It comes with no further connection hardware, so I know I will need to
sour=
ce a female threaded elbow to a flexible hose tail... something like this:
https://www.amazon.co.uk/Connector-Thread-Fitting-Caravan-Barbeque/dp/B01DS=
2NI5U/ref=3Dsr_1_43?ie=3DUTF8&qid=3D1488187518&sr=3D8-43&keywords=3Dgas+pip=
e+connector
but I need to determine the correct:
scale - metric or imperial
size - =BD"? 20mm?
thread pitch
of the brass threaded connector on the hob...
Cheers
Paul G.
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx]
Sent: 27 February 2017 09:26
To: ukha_d@xxxxxxx
Subject: [ukha_d] Gas leak sensor recommendation
Hi all.
I'm in the process of installing a gas cooking hob. As I'm in Norway,
where=
mains gas is non existent, gas appliances will always be run from bottled =
gas. Before I get too far into it, I'd like to spec a gas sensor that I
can=
install in the kitchen near to the gas bottle. (at the moment, I'm envisag=
ing it will live in the cupboard under the sink, where it is an easy route
=
for the gas pipe to run to the hob - unless I discover some regulations
tha=
t demand otherwise).
There are plenty of standalone detectors on Amazon, but what I'd prefer is
=
a gas sensor I can connect to my alarm panel (Comfort) - then I can be
noti=
fied by email, SMS, phone etc. in the event of a gas leak alarm when I'm
no=
t there. - although in the first instance, I guess a standalone would do
(b=
etter that than nothing).
Does anyone have any experience of gas leak sensors for connection to an
al=
arm panel? - any recommendations?
FYI the gas will be either propane or butane - the hob supports both, and
I=
haven't decided which I will set it for yet - I'm not aware of any reason =
for choosing one over the other, so unless one presents itself, I'll just
g=
o with whichever is easiest (or cheapest) to source in my area.
Cheers
Paul G.
--_000_HE1PR08MB03007786BFB122FE273E300A87570HE1PR08MB0300eurp_
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
<head>
<style type=3D"text/css">
<!--
/* start of attachment style */
.ygrp-photo-title{
clear: both;
font-size: smaller;
height: 15px;
overflow: hidden;
text-align: center;
width: 75px;
}
div.ygrp-photo{
background-position: center;
background-repeat: no-repeat;
background-color: white;
border: 1px solid black;
height: 62px;
width: 62px;
}
div.photo-title=20
a,
div.photo-title a:active,
div.photo-title a:hover,
div.photo-title a:visited {
text-decoration: none;=20
}
div.attach-table div.attach-row {
clear: both;
}
div.attach-table div.attach-row div {
float: left;
/* margin: 2px;*/
}
p {
clear: both;
padding: 15px 0 3px 0;
overflow: hidden;
}
div.ygrp-file {
width: 30px;
valign: middle;
}
div.attach-table div.attach-row div div a {
text-decoration: none;
}
div.attach-table div.attach-row div div span {
font-weight: normal;
}
div.ygrp-file-title {
font-weight: bold;
}
/* end of attachment style */
-->
</style>
</head>
<html xmlns:v=3D"urn:schemas-microsoft-com:vml"
xmlns:o=3D"urn:schemas-micr=
osoft-com:office:office"
xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml";
xmlns=3D"http:=
//www.w3.org/TR/REC-html40">
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html;
charset=3Diso-8859-=
1">
<meta name=3D"Generator" content=3D"Microsoft Word 15
(filtered medium)">
<!--[if !mso]><style>v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
</style><![endif]--><style><!--
/* Font Definitions */
@font-face
{font-family:Wingdings;
panose-1:5 0 0 0 0 0 0 0 0 0;}
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:Verdana;
panose-1:2 11 6 4 3 5 4 4 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri",sans-serif;
mso-fareast-language:EN-US;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:#0563C1;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:#954F72;
text-decoration:underline;}
p
{mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0cm;
mso-margin-bottom-alt:auto;
margin-left:0cm;
font-size:12.0pt;
font-family:"Times New Roman",serif;}
tt
{mso-style-priority:99;
font-family:"Courier New";}
p.ygrp-photo-title, li.ygrp-photo-title, div.ygrp-photo-title
{mso-style-name:ygrp-photo-title;
mso-margin-top-alt:auto;
margin-right:0cm;
mso-margin-bottom-alt:auto;
margin-left:0cm;
text-align:center;
font-size:10.0pt;
font-family:"Times New Roman",serif;}
span.EmailStyle19
{mso-style-type:personal;
font-family:"Calibri",sans-serif;
color:windowtext;}
span.EmailStyle21
{mso-style-type:personal-reply;
font-family:"Calibri",sans-serif;
color:#1F497D;}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page WordSection1
{size:612.0pt 792.0pt;
margin:72.0pt 72.0pt 72.0pt 72.0pt;}
div.WordSection1
{page:WordSection1;}
/* List Definitions */
@list l0
{mso-list-id:240601323;
mso-list-template-ids:1253474440;}
@list l0:level1
{mso-level-number-format:bullet;
mso-level-text:\F0B7;
mso-level-tab-stop:36.0pt;
mso-level-number-position:left;
text-indent:-18.0pt;
mso-ansi-font-size:10.0pt;
font-family:Symbol;}
@list l0:level2
{mso-level-number-format:bullet;
mso-level-text:o;
mso-level-tab-stop:72.0pt;
mso-level-number-position:left;
text-indent:-18.0pt;
mso-ansi-font-size:10.0pt;
font-family:"Courier New";
mso-bidi-font-family:"Times New Roman";}
@list l0:level3
{mso-level-number-format:bullet;
mso-level-text:\F0A7;
mso-level-tab-stop:108.0pt;
mso-level-number-position:left;
text-indent:-18.0pt;
mso-ansi-font-size:10.0pt;
font-family:Wingdings;}
@list l0:level4
{mso-level-number-format:bullet;
mso-level-text:\F0A7;
mso-level-tab-stop:144.0pt;
mso-level-number-position:left;
text-indent:-18.0pt;
mso-ansi-font-size:10.0pt;
font-family:Wingdings;}
@list l0:level5
{mso-level-number-format:bullet;
mso-level-text:\F0A7;
mso-level-tab-stop:180.0pt;
mso-level-number-position:left;
text-indent:-18.0pt;
mso-ansi-font-size:10.0pt;
font-family:Wingdings;}
@list l0:level6
{mso-level-number-format:bullet;
mso-level-text:\F0A7;
mso-level-tab-stop:216.0pt;
mso-level-number-position:left;
text-indent:-18.0pt;
mso-ansi-font-size:10.0pt;
font-family:Wingdings;}
@list l0:level7
{mso-level-number-format:bullet;
mso-level-text:\F0A7;
mso-level-tab-stop:252.0pt;
mso-level-number-position:left;
text-indent:-18.0pt;
mso-ansi-font-size:10.0pt;
font-family:Wingdings;}
@list l0:level8
{mso-level-number-format:bullet;
mso-level-text:\F0A7;
mso-level-tab-stop:288.0pt;
mso-level-number-position:left;
text-indent:-18.0pt;
mso-ansi-font-size:10.0pt;
font-family:Wingdings;}
@list l0:level9
{mso-level-number-format:bullet;
mso-level-text:\F0A7;
mso-level-tab-stop:324.0pt;
mso-level-number-position:left;
text-indent:-18.0pt;
mso-ansi-font-size:10.0pt;
font-family:Wingdings;}
ol
{margin-bottom:0cm;}
ul
{margin-bottom:0cm;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026"
/>
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]-->
</head>
<body lang=3D"EN-GB" link=3D"#0563C1"
vlink=3D"#954F72">
<!-- **begin egp html banner** -->
<br><br>
<!-- **end egp html banner** -->
<div class=3D"WordSection1">
<p class=3D"MsoNormal"><span
style=3D"color:#1F497D">Further to this, - and=
a teensy bit OT – anyone have any knowledge of gas hob pipe
connecto=
rs?<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span
style=3D"color:#1F497D"><o:p> </o:p></spa=
n></p>
<p class=3D"MsoNormal"><span
style=3D"color:#1F497D">I have bought an Ikea =
domino 2 burner gas hob. It comes with a threaded male connector poking
out=
the bottom… there is *<b>absolutely no</b>* data
provided in the doc=
umentation regarding the size or thread pitch
of this connector… - is that because it’s
standardised?<o:p></=
o:p></span></p>
<p class=3D"MsoNormal"><span
style=3D"color:#1F497D"><o:p> </o:p></spa=
n></p>
<p class=3D"MsoNormal"><span
style=3D"color:#1F497D">It comes with no furth=
er connection hardware, so I know I will need to source a female threaded
e=
lbow to a flexible hose tail… something like
this:<o:p></o:p></span><=
/p>
<p class=3D"MsoNormal"><span
style=3D"color:#1F497D"><a href=3D"https://www=
.amazon.co.uk/Connector-Thread-Fitting-Caravan-Barbeque/dp/B01DS2NI5U/ref=
=3Dsr_1_43?ie=3DUTF8&qid=3D1488187518&sr=3D8-43&keywords=3Dgas&=
#43;pipe+connector">https://www.amazon.co.uk/Connector-Thread-Fitting-C=
aravan-Barbeque/dp/B01DS2NI5U/ref=3Dsr_1_43?ie=3DUTF8&qid=3D1488187518&=
amp;sr=3D8-43&keywords=3Dgas+pipe+connector</a><o:p></o:p></spa=
n></p>
<p class=3D"MsoNormal"><span
style=3D"color:#1F497D"><o:p> </o:p></spa=
n></p>
<p class=3D"MsoNormal"><span
style=3D"color:#1F497D">but I need to determin=
e the correct:<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span
style=3D"color:#1F497D">scale – metric o=
r imperial<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span
style=3D"color:#1F497D">size – =BD”=
;? 20mm?<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span
style=3D"color:#1F497D">thread pitch<o:p></o:p=
></span></p>
<p class=3D"MsoNormal"><span
style=3D"color:#1F497D">of the brass threaded =
connector on the
hob…<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span
style=3D"color:#1F497D"><o:p> </o:p></spa=
n></p>
<p class=3D"MsoNormal"><span
style=3D"color:#1F497D">Cheers<o:p></o:p></spa=
n></p>
<p class=3D"MsoNormal"><span
style=3D"color:#1F497D"><o:p> </o:p></spa=
n></p>
<p class=3D"MsoNormal"><span
style=3D"color:#1F497D">Paul G.<o:p></o:p></sp=
an></p>
<p class=3D"MsoNormal"><span
style=3D"color:#1F497D"><o:p> </o:p></spa=
n></p>
<p class=3D"MsoNormal"><a
name=3D"_MailEndCompose"><span style=3D"color:#1F=
497D"><o:p> </o:p></span></a></p>
<div>
<div style=3D"border:none;border-top:solid #E1E1E1
1.0pt;padding:3.0pt 0cm =
0cm 0cm">
<p class=3D"MsoNormal"><b><span
lang=3D"EN-US" style=3D"mso-fareast-languag=
e:EN-GB">From:</span></b><span
lang=3D"EN-US" style=3D"mso-fareast-language=
:EN-GB"> ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx]
<br>
<b>Sent:</b> 27 February 2017 09:26<br>
<b>To:</b> ukha_d@xxxxxxx<br>
<b>Subject:</b> [ukha_d] Gas leak sensor
recommendation<o:p></o:p></span></=
p>
</div>
</div>
<p
class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal"><span
style=3D"font-size:12.0pt;font-family:"Ti=
mes New
Roman",serif;mso-fareast-language:EN-GB"><br>
<br>
<br>
<o:p></o:p></span></p>
<p class=3D"MsoNormal">Hi
all.<o:p></o:p></p>
<p
class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal">I’m in the process of
installing a gas cooking=
hob. As I’m in Norway, where mains gas is non existent, gas
applianc=
es will always be run from bottled gas. Before I get too far into it,
IR=
17;d like to spec a gas sensor that I can install in
the kitchen near to the gas bottle. (at the moment, I’m
envisaging i=
t will live in the cupboard under the sink, where it is an easy route for
t=
he gas pipe to run to the hob – unless I discover some
regulations th=
at demand otherwise).<o:p></o:p></p>
<p
class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal">There are plenty of standalone
detectors on Amazon, =
but what I’d prefer is a gas sensor I can connect to my alarm
panel (=
Comfort) – then I can be notified by email, SMS, phone etc. in
the ev=
ent of a gas leak alarm when I’m not there. –
although in the first instance, I guess a standalone would do (better that=
than nothing).<o:p></o:p></p>
<p
class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal">Does anyone have any experience of
gas leak sensors =
for connection to an alarm panel? – any
recommendations?<o:p></o:p></=
p>
<p
class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal">FYI the gas will be either propane
or butane –=
the hob supports both, and I haven’t decided which I will set it
for=
yet – I’m not aware of any reason for choosing one over
the ot=
her, so unless one presents itself, I’ll just go with whichever
is easiest (or cheapest) to source in my
area.<o:p></o:p></p>
<p
class=3D"MsoNormal"><o:p> </o:p></p>
<p
class=3D"MsoNormal">Cheers<o:p></o:p></p>
<p
class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal">Paul
G.<o:p></o:p></p>
<p
class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal"><span
style=3D"font-size:12.0pt;font-family:"Ti=
mes New
Roman",serif;mso-fareast-language:EN-GB"><br>
<br>
<br>
<o:p></o:p></span></p>
<div>
<p class=3D"MsoNormal"><span
style=3D"font-size:12.0pt;font-family:"Ti=
mes New
Roman",serif;color:white;mso-fareast-language:EN-GB"><o:p></o:=
p></span></p>
</div>
</div>
<!-- **begin egp html banner** -->
<br>
<br>
<!-- **end egp html banner** -->
<div width=3D"1" style=3D"color: white; clear:
both;"/>__._,_.___</div>
=20=20=20=20=20=20
=20=20
=20=20=20=20
<div id=3D"fromDMARC" style=3D"clear:both; margin-top:
10px;">
<hr style=3D"height:2px ; border-width:0; color:#E3E3E3; backgroun=
d-color:#E3E3E3;">
Posted by: Paul Gordon <paul_gordon@xxxxxxx> <hr=
style=3D"height:2px ; border-width:0; color:#E3E3E3;
background-color:#E3E=
3E3;">
</div>
<!-- Start Recommendations -->
<!-- End Recommendations -->
<!-- **begin egp html banner** -->
<br><br>
<tt>
<*> Join the Automated Home Forums<BR>
<a href=3D"http://www.automatedhome.co.uk/vbulleti=
n/">http://www.automatedhome.co.uk/vbulletin/</a><BR>
<BR>
<*> UKHA_D Mailing list in association with:<BR>
<a href=3D"http://www.automatedhome.co.uk";>http://=
www.automatedhome.co.uk</a><BR>
<BR>
<BR>
</tt>
<br><br>
<!-- **end egp html banner** -->
<!-- **begin egp html banner** -->
<img src=3D"http://geo.yahoo.com/serv?s=3D97476590/grpId=3D1109639/grpspI=
d=3D1705041992/msgId=3D166186/stime=3D1488188489"
width=3D"1" height=3D"1">=
<br>
<!-- **end egp html banner** -->
=20=20=20=20
<!-- **begin egp html banner** -->
<br>
=20=20=20
=20=20=20=20=20
=20
<!-- **begin egp html banner** -->
<div id=3D"ygrp-vital" style=3D"background-color:
#f2f2f2; font-fam=
ily: Verdana; font-size: 10px; margin-bottom: 10px; padding:
10px;">
<span id=3D"vithd" style=3D"font-weight: bold; color:
#333; text-tr=
ansform: uppercase; "><a href=3D"https://groups.yahoo.com/neo/groups/ukha_d=
/info;_ylc=3DX3oDMTJlNmdkbDNkBF9TAzk3MzU5NzE0BGdycElkAzExMDk2MzkEZ3Jwc3BJZA=
MxNzA1MDQxOTkyBHNlYwN2dGwEc2xrA3ZnaHAEc3RpbWUDMTQ4ODE4ODQ4OQ--"
style=3D"te=
xt-decoration: none;">Visit Your Group</a></span>
<ul style=3D"list-style-type: none; margin: 0; padding: 0; display:
in=
line;">
</ul>
</div>
<div id=3D"ft" style=3D"font-family: Arial; font-size:
11px; margin-top: 5p=
x; padding: 0 2px 0 0; clear: both;">
<a href=3D"https://groups.yahoo.com/neo;_ylc=3DX3oDMTJkcGE2ZWFkBF9TAzk3ND=
c2NTkwBGdycElkAzExMDk2MzkEZ3Jwc3BJZAMxNzA1MDQxOTkyBHNlYwNmdHIEc2xrA2dmcARzd=
GltZQMxNDg4MTg4NDg5" style=3D"float: left;"><img
src=3D"http://l.yimg.com/r=
u/static/images/yg/img/email/new_logo/logo-groups-137x15.png"
height=3D"15"=
width=3D"137" alt=3D"Yahoo! Groups"
style=3D"border: 0;"/></a>
<div style=3D"color: #747575; float: right;"> •
<a href=3D"https://i=
nfo.yahoo.com/privacy/us/yahoo/groups/details.html"
style=3D"text-decoratio=
n: none;">Privacy</a> • <a href=3D"mailto:ukha_d-unsubscribe@yahoogrou=
ps.com?subject=3DUnsubscribe" style=3D"text-decoration:
none;">Unsubscribe<=
/a> • <a href=3D"https://info.yahoo.com/legal/us/yahoo/utos/terms/";
st=
yle=3D"text-decoration: none;">Terms of Use</a>
</div>
</div>
<!-- **end egp html banner** -->
</div> <!-- ygrp-msg -->
=20=20=20
<br>
<!-- **end egp html banner** -->
<div style=3D"color: white; clear:
both;"/>__,_._,___</div>
</body>
</html>
--_000_HE1PR08MB03007786BFB122FE273E300A87570HE1PR08MB0300eurp_--
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|