[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: SMA PV inverter
--=====================_859032937==.ALT
Content-Type: text/plain; charset="iso-8859-1"; format=flowed
Content-Transfer-Encoding: quoted-printable
Thanks Marcus
Problem is Inverter is on garage wall 20m away=20
with ali foil covered insulation between.
I have been running with a couple of amplified=20
usb cables end to end, but that is a bit flakey.
Good idea about usb extenders on cat5. Will try that.
Rgds
Peter
At 09:18 02/06/2014, you wrote:
>
>
>Peter,
>
>
>
>We have the same inverter and had the BT power=20
>increased. It=92s set via the Sunny Explorer=20
>software but unfortunately it=92s not one of the=20
>settings available to the =93user=94 login and you=20
>need to log in with the installer/admin pin to be able to change it.
>
>
>
>I=92m not sure how you can gain admin access=20
>without the installer telling you the pin he=20
>setup. Even if you found another friendly=20
>installer he would need to know the PIN that=20
>your original installer setup. You could try=20
>ringing SMA support , maybe they have a super user pin or something ?
>
>
>
>Why do you want to increase it ? If it=92s simply=20
>to log data onto a PC then you could always move=20
>the actual BT dongle closer to the inverter=20
>using some USB extenders over Cat5.=20
>Alternatively (like me) you setup a Raspberry Pi=20
>with a BT dongle close to the inverter and then=20
>have it do the capture (via PVCCUpload) and=20
>upload the data the PVOutput website for=20
>graphing. Here=92s a link to our PVOutput solar=20
>generation ;=20
><http://www.pvoutput.org/intraday.jsp?sid=3D2970&dt>http://www.pvoutput.or=
g/intraday.jsp?sid=3D2970&dt=3D
>
>
>
>
>
>
>
>Marcus
>
>
>
>From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx]
>Sent: 01 June 2014 12:48
>To: ukha_d@xxxxxxx
>Subject: [ukha_d] SMA PV inverter
>
>
>
>
>
>Hi all,
>Been quiet, but I am still lurking and nursing my X10etc, Sonos,
>multiple tvs, gshp and solar!
>PV inverter question.
>We have an SMD Sunny Boy SB4000Tl-20. I believe there is an installer
>option to increase the bluetooth power.
>Does anyone on the list know how to do it?
>My installer, who has gone to ground anyway, had no idea.
>Any clues?
>Thanks
>Peter
>
>
--=====================_859032937==.ALT
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
<head>
<style type=3D"text/css">
<!--
/* start of attachment style */
.ygrp-photo-title{
clear: both;
font-size: smaller;
height: 15px;
overflow: hidden;
text-align: center;
width: 75px;
}
div.ygrp-photo{
background-position: center;
background-repeat: no-repeat;
background-color: white;
border: 1px solid black;
height: 62px;
width: 62px;
}
div.photo-title=20
a,
div.photo-title a:active,
div.photo-title a:hover,
div.photo-title a:visited {
text-decoration: none;=20
}
div.attach-table div.attach-row {
clear: both;
}
div.attach-table div.attach-row div {
float: left;
/* margin: 2px;*/
}
p {
clear: both;
padding: 15px 0 3px 0;
overflow: hidden;
}
div.ygrp-file {
width: 30px;
valign: middle;
}
div.attach-table div.attach-row div div a {
text-decoration: none;
}
div.attach-table div.attach-row div div span {
font-weight: normal;
}
div.ygrp-file-title {
font-weight: bold;
}
/* end of attachment style */
-->
</style>
</head>
<html>
<body>
<!-- **begin egp html banner** -->
<br><br>
<!-- **end egp html banner** -->
Thanks Marcus<br>
Problem is Inverter is on garage wall 20m away with ali foil covered
insulation between.<br>
I have been running with a couple of amplified usb cables end to end, but
that is a bit flakey.<br>
Good idea about usb extenders on cat5. Will try that.<br>
Rgds<br>
Peter<br><br>
At 09:18 02/06/2014, you wrote:<br>
<blockquote type=3Dcite class=3Dcite cite=3D"">
<br><br>
Peter,<br><br>
<br><br>
We have the same inverter and had the BT power increased. It=92s set via
the Sunny Explorer software but unfortunately it=92s not one of the
settings available to the =93user=94 login and you need to log in with the
installer/admin pin to be able to change it. <br><br>
<br><br>
I=92m not sure how you can gain admin access without the installer telling
you the pin he setup. Even if you found another friendly installer he
would need to know the PIN that your original installer setup. You could
try ringing SMA support , maybe they have a super user pin or something
?<br><br>
<br><br>
Why do you want to increase it ? If it=92s simply to log data onto a PC
then you could always move the actual BT dongle closer to the inverter
using some USB extenders over Cat5. Alternatively (like me) you setup a
Raspberry Pi with a BT dongle close to the inverter and then have it do
the capture (via PVCCUpload) and upload the data the PVOutput website for
graphing. Here=92s a link to our PVOutput solar generation ;
<a href=3D"http://www.pvoutput.org/intraday.jsp?sid=3D2970&dt";>
http://www.pvoutput.org/intraday.jsp?sid=3D2970&dt</a>=3D<br><br>
<br><br>
<br><br>
<br><br>
<b>Marcus <br>
</b><br>
<br><br>
<b>From:</b> ukha_d@xxxxxxx
[<a href=3D"mailto:ukha_d@xxxxxxx";
eudora=3D"autourl">
mailto:ukha_d@xxxxxxx</a>]
<br>
<b>Sent:</b> 01 June 2014 12:48<br>
<b>To:</b> ukha_d@xxxxxxx<br>
<b>Subject:</b> [ukha_d] SMA PV inverter<br><br>
<br><br>
<br><br>
Hi all,<br>
Been quiet, but I am still lurking and nursing my X10etc, Sonos, <br>
multiple tvs, gshp and solar!<br>
PV inverter question.<br>
We have an SMD Sunny Boy SB4000Tl-20. I believe there is an installer
<br>
option to increase the bluetooth power.<br>
Does anyone on the list know how to do it?<br>
My installer, who has gone to ground anyway, had no idea.<br>
Any clues?<br>
Thanks<br>
Peter<br><br>
</blockquote>
<!-- **begin egp html banner** -->
<br>
<br>
<!-- **end egp html banner** -->
<div width=3D"1" style=3D"color: white; clear:
both;"/>__._,_.___</div>
=20=20=20=20=20=20
=20=20
=20=20=20=20
<div id=3D"fromDMARC" style=3D"margin-top:
10px;">
<hr style=3D"height:2px ; border-width:0; color:#E3E3E3; backgroun=
d-color:#E3E3E3;">
Posted by: Peter + Jane <pandj.munnoch@xxxxxxx> =
<hr style=3D"height:2px ; border-width:0; color:#E3E3E3;
background-colo=
r:#E3E3E3;">
</div>
<!-- Start Recommendations -->
<!-- End Recommendations -->
<!-- **begin egp html banner** -->
<br><br>
<tt>
<*> Join the Automated Home Forums<BR>
<a href=3D"http://www.automatedhome.co.uk/vbulleti=
n/">http://www.automatedhome.co.uk/vbulletin/</a><BR>
<BR>
<*> UKHA_D Mailing list in association with:<BR>
<a href=3D"http://www.automatedhome.co.uk";>http://=
www.automatedhome.co.uk</a><BR>
<BR>
<BR>
</tt>
<br><br>
<!-- **end egp html banner** -->
<!-- **begin egp html banner** -->
<img src=3D"http://geo.yahoo.com/serv?s=3D97476590/grpId=3D1109639/grpspI=
d=3D1705041992/msgId=3D164878/stime=3D1401703240"
width=3D"1" height=3D"1">=
<br>
<!-- **end egp html banner** -->
=20=20=20=20
<!-- **begin egp html banner** -->
<br>
=20=20=20
=20=20=20=20=20
=20
<!-- **begin egp html banner** -->
<div id=3D"ygrp-vital" style=3D"background-color:
#f2f2f2; font-fam=
ily: Verdana; font-size: 10px; margin-bottom: 10px; padding:
10px;">
<span id=3D"vithd" style=3D"font-weight: bold; color:
#333; text-tr=
ansform: uppercase; "><a href=3D"https://groups.yahoo.com/neo/groups/ukha_d=
/info;_ylc=3DX3oDMTJlZDI4dWxsBF9TAzk3MzU5NzE0BGdycElkAzExMDk2MzkEZ3Jwc3BJZA=
MxNzA1MDQxOTkyBHNlYwN2dGwEc2xrA3ZnaHAEc3RpbWUDMTQwMTcwMzI0MA--"
style=3D"te=
xt-decoration: none;">Visit Your Group</a></span>
<ul style=3D"list-style-type: none; margin: 0; padding: 0; display:
in=
line;">
</ul>
</div>
<div id=3D"ft" style=3D"font-family: Arial; font-size:
11px; margin-top: 5p=
x; padding: 0 2px 0 0; clear: both;">
<a href=3D"https://groups.yahoo.com/neo;_ylc=3DX3oDMTJkYjJuajc1BF9TAzk3ND=
c2NTkwBGdycElkAzExMDk2MzkEZ3Jwc3BJZAMxNzA1MDQxOTkyBHNlYwNmdHIEc2xrA2dmcARzd=
GltZQMxNDAxNzAzMjQw" style=3D"float: left;"><img
src=3D"http://l.yimg.com/r=
u/static/images/yg/img/email/new_logo/logo-groups-137x15.png"
height=3D"15"=
width=3D"<? ol var!Pref.EmailFooterLogo.FullFeatured.Width
?>" alt=3D"Yaho=
o! Groups" style=3D"border: 0;"/></a>
<div style=3D"color: #747575; float: right;"> •
<a href=3D"https://i=
nfo.yahoo.com/privacy/us/yahoo/groups/details.html"
style=3D"text-decoratio=
n: none;">Privacy</a> • <a href=3D"mailto:ukha_d-unsubscribe@yahoogrou=
ps.com?subject=3DUnsubscribe" style=3D"text-decoration:
none;">Unsubscribe<=
/a> • <a href=3D"https://info.yahoo.com/legal/us/yahoo/utos/terms/";
st=
yle=3D"text-decoration: none;">Terms of Use</a>
</div>
</div>
<!-- **end egp html banner** -->
</div> <!-- ygrp-msg -->
=20=20=20
<br>
<!-- **end egp html banner** -->
<div style=3D"color: white; clear:
both;"/>__,_._,___</div>
</body>
</html>
--=====================_859032937==.ALT--
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|