Re: GAS Usage Monitoring ?

[Stuart Billinghurst <stuart@xxxxxxxxxxxxxxxxx>]

Apologies for jumping into this thread with a related question,

but how would people go about the same gas monitoring question if you
were on bottled gas? i.e. there is no meter to start from?

Stuart.
On 12/09/2012 13:03, Marcus Warrington wrote:
>
> Hi Simon,
>
> Thanks for the quick reply :)
>
> That hobby board seems ideal and I'm sure I already have a USB
> one-wire adapter somewhere (I think you used to be able to order one
> wire sensors and adapters for free as samples from the website).
> $28 seems a bit steep.. I'll have a look around.
>
> Thanks again.
>
> Marcus
>
> From: ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>
> [mailto:ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>]
On
> Behalf Of Simon Haslam
> Sent: 12 September 2012 12:33
> To: ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>
> Subject: Re: [ukha_d] GAS Usage Monitoring ?
>
> Nice! Having a reed switch ready to go seems ideal and will save a lot
> of faff with photodiodes and the like.
>
> I bought this counter
> http://www.hobby-boards.com/store/products/Dual-Counter.html
last year
> (just to sit on a shelf of course). It's got two inputs and I assume
> you'd just connect the reed switch between the input and 5V or ground
> (I've not looked up which). Don't know whether it would need
> de-bouncing - hopefully not - so minimal electronics skills needed.
>
> The counter is 1-wire so you could then use a 1-wire to USB adaptor
> and something like OWFS to collect readings - shouldn't take long to
> set up. You'd need to run a 1-wire/cat 5 from your meter housing to a
> PC/NAS/RasPi/etc running OWFS though.
>
> HTH
>
> Simon
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>



[Non-text portions of this message have been removed]



------------------------------------

<*> Join the Automated Home Forums
http://www.automatedhome.co.uk/vbulletin/