Re: Nasty surprise this morning.....

["Andy" <andywhitfield2002@xxxxxxxxxxx>]

Rob,

Have you been getting my emails about the UPS?

Regards
Andy
UPS Man

--- In ukha_d@xxxxxxx, Rob Iles <rob.iles@...> wrote:
>
> Crikey! Excuse me while I go and find a fuse!!!
>
> Appreciate the "heads-up".
>
> R.
>
> On 26 October 2012 16:52, Keith Doxey <ukha@...> wrote:
>
> > **
> >
> >
> > Hi All
> >
> > Woke up this morning to find that the ring main had tripped off
and there
> > was a "burnt electrical" smell hanging around.
> >
> > Went to the consumer unit and flicked the breaker back on and it
instantly
> > tripped off, but it tends to do that after I have had the power
off due to
> > the inrush currents on all the switch mode PSUs dotted around the
house.
> >
> > Flicked it back on again and it stayed on but as the power came
back on
> > there was a flash and bang from behind me. I thought at first it
was the
> > freezer but that seemed to be working OK.
> >
> > Then I noticed that the display was blank on the X10 Mini Timer.
Looking
> > down at its power supply revealed a case cracked open and a big
scorch mark
> > on the case as well. Opened it up and one of the circuit boards
in there is
> > totally destroyed.
> >
> > What I hadn't realised until today is that although they plug
into a 13A
> > socket they are TOTALLY UNFUSED !!!!
> >
> > I have a spare kicking around somewhere but I am going to make
sure I plug
> > it in via a short extension lead fitted with the lowest value
fuse I can
> > find.
> >
> > Thought I would give people the heads up in case anyone else has
one
> > plugged
> > directly into a socket.
> >
> > Keith
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
>
>
>
> --
> * e: Rob Iles <rob.iles@...>
> w: www.domialifestyle.com <http://www.domialifestyle.com>
> *[image: http://www.domialifestyle.com/images/logo.jpg]<http://www.domialifestyle.com>
> Harmony <http://www.domialifestyle.com/Harmony2.asp>
 Domia
> Lifestyle<http://www.domialifestyle.com/>
> Support Forum <http://idomus.co.uk/forum/>
>
>
> [Non-text portions of this message have been removed]
>




------------------------------------

<*> Join the Automated Home Forums
http://www.automatedhome.co.uk/vbulletin/