The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

[OT]ish Router +modem problem


  • Subject: [OT]ish Router +modem problem
  • From: "peter_church" <yahoo@xxxxxxxxxxxxxxxx>
  • Date: Thu, 06 Jan 2011 23:13:04 -0000

I'm trying to set up the network in my holiday home so that it links
to my main home - that way I can control Comfort etc all via a VPN link (in
theory...).  Problem is I can't even get that far and I think it is
probably some simple problem with the modem/router but cannot fathom it. 
Can anyone of the bright sparks here suggest what might be wrong (bearing
in mind I cannot test again until I'm there in 6 weeks...)

At the simplest level the setup is this:

Huawei B260a 3g modem linked via Ethernet to a Netgear FVS318 Pro-Safe VPN
firewall, then the network.

The modem has DHCP capability, firewall, DMZ etc. facilities, but ideally
I'd want it just to present the WAN IP to the router (for the DynDNS VPN to
work) but I don't seem to be able to do that, so for now have enabled DHCP
on the modem (gateway 192.168.3.1 DHCP range .2-.100) to provide a LAN
address to the WAN port on the router.

The router is getting it's WAN IP address (192.168.3.2) from the router
then acting as a DHCP for the LAN side of it (Gateway 192.168.1.1 range
.2-.100). The management page on the router allows me to ping the web.

However when I connect a PC to the router the machine gets an IP address
but cannot see the web.  One thing I have noticed is that all of the
assigned DNS servers inside the router refer to 192.168.3.1.

When I connect the PC straight to the modem it works.

I think it must be something to do with DNS or subnets, but am not that
familiar with the impact they have, so any pointers would be greatfully
received.  I've tried various combinations including forcing the external
DNS settings onto the router and the PC - no good.  And moving the router
to 192.168.3.101 range 102-200) and neither work.

I've left it with the router out of the loop and am receiving daily e-mails
from the low power PC I've left out there with temperatures and heating
settings - so I at least feel I've got something working!

TIA

Pete

PS there was a discussion recently around 3g signal boosters and I've got
one of those running as well - works well, although the positioning of the
antenna is extremely sensitive and trial and error has it only working
attached to the upper hinge of some french doors - but connection is rock
solid once there!



------------------------------------

<*> Join the Automated Home Forums
http://www.automatedhome.co.uk/vbulletin/


UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.