The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Re: Help to 'sell' me CBUS



... and he can get in some tight spaces - like a double wardrobe in my
house ;)

Paul.

-----Original Message-----
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
Phillip Harris
Sent: 07 November 2010 14:05
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Re: Help to 'sell' me CBUS


I'll add another "top fella" mention for Ben too ... helped me
out with a problem that I was having too. :-D

Phil

On 7 Nov 2010, at 02:11, Ben Addison wrote:

> Thanks for the good feed back guy's :) i always try my best.
>
> Hi brian,
>
> If i can be of any help just ring or email me. i can be anywhere in
the uk or europe. so you never know when you ring i could be just round the
corner :0
>
> Thanks
> Ben Addison
> www.clipsalcbus.co.uk
> 07889845712
>  ----- Original Message -----
>  From: Paul Gale
>  To: ukha_d@xxxxxxx
>  Sent: Monday, November 01, 2010 9:32 AM
>  Subject: RE: [ukha_d] Re: Help to 'sell' me CBUS
>
>
>
>  I recommend Ben too - great :)
>
>  Paul.
>
>  -----Original Message-----
>  From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
GREGORY
>  Sent: 31 October 2010 08:11
>  To: ukha_d@xxxxxxx
>  Subject: [ukha_d] Re: Help to 'sell' me CBUS
>
>  Another recommendation for Ben here, we were very happy with him.
There are a lot of little gotcha's when installing the Wiser etc. that an
installer will know about and save a lot of time and hair-pulling. I know a
little bit about networks but I think some of it is more tricky than it
perhaps needs to be.
>
>  --- In ukha_d@xxxxxxx, Ben McCormack <yahoogroup@...> wrote:
>>
>> We have a couple of DLTs as well. To be honest I am not 100%
convinced by them as you have to look at them to read what is on the
display. Not saying they are bad just not perfect for me but they do look
very very cool.
>>
>> With the Saturns I try and keep similar settings in similar places
ie
>>
>> Top left throughout the house turns on the lights you would expect
from that location.
>> Bottom right turns off all the lights in that area
>>
>>
>> I am not aware of cycling scenes on the Saturns. from my pov not
sure you will even need more than 5/6 scenes. For me that may just become
confusing.
>>
>>
>> cbus installation - The best way I have seen is the following.
>>
>> Normal sparky wires all lighting zones and runs the 'feed' cable
back to the cbus dimmer area.
>> cbus sparky comes along and make the final connections and wires
up
>> the cbus side. (I used Ben Adison - http://www.benaddison.com/. On the
list and comes recommended by a few of us.) I personally used Ben to do the
whole thing and have added some later lighting circuits.
>> snip
>
>  ------------------------------------
>
>  Yahoo! Groups Links
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
>
> Yahoo! Groups Links
>
>
>


------------------------------------



UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.