Re: X10 AD10 Din Rail issue - spare parts needed

[Simon <simon.ryley@xxxxxxxxxx>]

Hi Rob,

Same thing happened to me, no warning one day when the part broke.

I looked into repairing of having a replacement manufactured, it just
wasn't worth it unless you had access to the right kit already.  A metal
part would be stronger but is also conductive, so not a good idea.

When 3D printers become more widely available, it will be easy to make a
replacement...

Simon


On 6 May 2010, at 22:41, egelbeertje wrote:

> Hi, within weeks 2 AD10 units failed (after 7 years usage), the
plastic rocker inside the relay - the part which connects the metal
solenoid plunger to the actual switch) broke off, forcing a replacement of
the 2 units.
> Somebody knows if/where/how this 2 cent plactic part can be obtained
as to prepare the now defective units as hot-spare (and save some $ in the
process rather than buying 2 completely new ones).
>
> Rgds Rob
>
>




[Non-text portions of this message have been removed]



------------------------------------

<*> Join the Automated Home Forums
http://www.automatedhome.co.uk/vbulletin/