The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Composite -> S-Video



Hi Marc

All the OneLan boxes listed on their website can take a composite input or
S-video input so you should be able to connect the two directly together
with no adapter required.

Keith

> -----Original Message-----
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx]
> On Behalf Of Marc Fuller
> Sent: 01 September 2009 14:55
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] Composite -> S-Video
>
> Hi Keith,
>
> It's actually a feed from a Geovision server to a OneLan box
> so unfortunately it's a straight composite signal with no way
> to configure.
>
> I think just putting a cable converter to S-Video will be
> fine as it's on a screen with lots of other information and
> won't be that big.
>
> Many thanks
>
> Marc
>
> Keith Doxey wrote:
> >
> >
> > If it's a TV capture card you will probably find that you
> can select
> > Composite as an input using just the Luma pin of the
> S-video connector.
> > That's the way a lot of the Hauppauge cards work.
> >
> > Keith
> >
> >  > -----Original Message-----
> >  > From: ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>
> > [mailto:ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>]
> >  > On Behalf Of Marc Fuller
> >  > Sent: 01 September 2009 11:00
> >  > To: ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>
 >
> > Subject: Re: [ukha_d] Composite -> S-Video  >  > OK...
no
> problem on
> > quality as it's being fed into a One Lan  > box for a split
> > information screen.
> >  >
> >  > Many thanks Keith !
> >  >
> >  > Marc
> >  >
> >  > Keith Doxey wrote:
> >  > >
> >  > >
> >  > > Yes but the quaility will be slightly worse than
> composite as the
> > > > passive filters don't work as well as an active filter.
> >  > >
> >  > > Even an active filter will give no improvement over
Composite.
> >  > >
> >  > > HTH
> >  > >
> >  > > Keith
> >  > >
> >  > > > -----Original Message-----
> >  > > > From: ukha_d@xxxxxxx
> <mailto:ukha_d%40yahoogroups.com>
> > <mailto:ukha_d%40yahoogroups.com>
 > >
> [mailto:ukha_d@xxxxxxx
> > <mailto:ukha_d%40yahoogroups.com>
<mailto:ukha_d%40yahoogroups.com>]
> >  > > > On Behalf Of Marc Fuller
> >  > > > Sent: 01 September 2009 09:21
> >  > > > To: UKHA
> >  > > > Subject: [ukha_d] Composite -> S-Video >
> Hey Guys,
> > > A  > >
> > quick question. I know you can easily convert S-Video to > 
> >
> > Composite...
> >  > > > but does it work the other way around?
> >  > > >
> >  > > > I have a Composite feed that I need to put into a
> S-Video >  >
> > > device. Will the standard S-Video to Composite connectors
>  > > work
> > the  > > other way around?
> >  > > >
> >  > > > Many Thanks
> >  > > >
> >  > > > Marc
> >  > > >
> >  > > >
> >  > > > ------------------------------------
> >  > > >
> >  > > > Yahoo! Groups Links
> >  > > >
> >  > > >
> >  > > >
> >  > > >
> >  > >
> >  > >
> >  >
> >  >
> >  > ------------------------------------
> >  >
> >  > Yahoo! Groups Links
> >  >
> >  >
> >  >
> >  >
> >
> >
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>



------------------------------------


UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.