[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: LED Door Lock Status Indicator Hack
Nice Work....
Personally i would have used a Bicoloured led since i have the hardware
using my PZM Boxes only remote mounting the leds...Homevision could poll
them via my hv i/o Expander and xPL via the serial interface...Martin i
think the 150 ohm resistor is a bit low if your using standard 20ma leds
connected to 12v dc....470 ohm would be better ..
Frank
----- Original Message -----
From: "Mark McCall" <lists@xxxxxxx>
To: "Ukha_D@xxxxxxx" <ukha_d@xxxxxxx>
Sent: Tuesday, November 03, 2009 7:57 PM
Subject: [ukha_d] LED Door Lock Status Indicator Hack
> Martin Howell has kindly written up and photographed his LED door lock
> status indicators for an Automated Home article...
>
> http://bit.ly/xUUZQ
>
> M.
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
------------------------------------
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|