[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Interfacing to an Aqualisa digital shower
Hi Kevin,
No, there is no overflow protection on the ILux bath.
The unit does disable the preset buttons for around a minute once the bath
is full, to help protect accidental over filling.
So provided you are using the presets then you should be OK. But if you
manually start the water, it will run forever, and your bath will overflow.
Despite this, I love the unit - the fill and forget is great, and the RF
remote means you don't need to have your controller anywhere near the bath.
Regards,
John
-----Original Message-----
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx]On Behalf Of
Kevin Hawkins
Sent: 23 February 2009 16:42
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Interfacing to an Aqualisa digital shower
Hi John,
Is the iLux bath overflow protected - and if so does it use pressure
sensing or detect water flowing out the overflow ?
------------------------------------
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|