The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: USB to Ethernet > with CBUS



Thanks Tim, Rob, Phil,

2 possible solutions:

1) If I only want it for getting scenes set right on Saturns etc, then I
guess having the PAC as a PCI is not too much of a problem so I could try
to
set up a USB - LAN bride and then use wifi - still not sure if the data
would flow through OK as I'm sure they'll be some driver or something that
stops it working.  Downside is that to end the PCI session I'll have to
unplug the USB cable or turn of the USB-LAN adaptor for the PAC to realise
it is not a PCI anymore

2) Use Rob's approach which is "simple" in that I have a
structured wiring
system so patching a CAT5 socket in the room to be "scened"
should not be
too much of a problem.  To turn the PAC back to a PAC all I have to do is
unplug the computer which is a lot easier...

If anyone has any positive experience of 1) then please let me know
otherwise I'll go down route 2.

Cheers

P

-----Original Message-----
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
Rob Iles
Sent: 03 December 2009 17:38
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] USB to Ethernet > with CBUS

Don't know if this is of any help or not.

We have a PACA5500 (PAC USB) situated in the least convenient place the
installers could put it - - behind a rack, about 10 foot off the floor,
surrounded by "stuff" that makes getting a ladder in there damn
near
impossible.

Cheap and cheerful solution that works for us. Plug USB Cable into PAC.
Plug
USB Over CAT5 Extender onto other end of USB Cable.  My PC has a USB over
CAT5 extender plugged into it.  When I need to work on it, I can string a
30M length of cat 5 between the two (out of hours of course, no health and
safety issues guv!), and the PAC pops up first as a USB device, then as a
serial port - much as it would do locally.


If you've got structured cabling, and you can go via a patch panel direct
to
desk (with no thing but cables involved), then that should work too.

Works for me, though I realise it's not *exactly* what you were after.

Rob





2009/12/3 Tim Hawes <timsyahoo@xxxxxxx>

>
>
> Ahh, I see. A problem not so much with the bridging device but with
> the features of the Cbus PAC.
>
> Thanks for clarifying.
>
> Tim.
>
>
> On Thu, Dec 3, 2009 at 8:10 AM, Phil Harris
<phil@xxxxxxx<phil%40avaddict.tv>>
> wrote:
> > If there's a host controller attached to the PAC USB port then
the
> > programmable controller side of the PAC is disabled and the PAC
acts as
a
> > basic PCI so there's no way to have it permanently connected to
anything
> by
> > USB and still have it function as a PAC...
> >
> > Phil
> >
> >> -----Original Message-----
> >> From: ukha_d@xxxxxxx <ukha_d%40yahoogroups.com>
[mailto:
> ukha_d@xxxxxxx <ukha_d%40yahoogroups.com>] On Behalf
> >> Of Tim Hawes
> >> Sent: 03 December 2009 08:07
> >> To: ukha_d@xxxxxxx <ukha_d%40yahoogroups.com>
> >> Subject: Re: [ukha_d] USB to Ethernet > with CBUS
> >>
> >> Not cheap, but one of these might work?
> >> <http://www.bb-
> >>
europe.com/product_family.asp?FamilyId=528&Trail=16&TrailType=Top>
> >>
> >> Cheers,
> >>
> >> Tim.
>
>



--
Rob Iles

Harmony - www.domialifestyle.com
Software Development - www.rob-iles.co.uk/rmidevelopment

Twitter: http://twitter.com/Rob_Iles
Skype: rob_iles
12seconds: http://12seconds.tv/channel/rmi


[Non-text portions of this message have been removed]



------------------------------------


UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.