[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: In wall touch panel heights to comply with building regs
If you have other light switches within the room that are at the
required
height for Part M then I would be inclined to speak to your building
inspector to agree whatever height you prefer - somewhere closer to face
height is probably going to be better for an in-wall LCD
display/touchscreen.
Neil B.
_____
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
darren_karp2001
Sent: 29 May 2008 18:21
To: ukha_d@xxxxxxx
Subject: [ukha_d] In wall touch panel heights to comply with building regs
Hi all,
Can anyone give me some advice on what the maximum height an in wall
touch panel can be on a new build. I've been told by a builder that the
top of the control panel or switch cannot be higher than 1200mm from
finished floor level to comply with Part M of the bulding regulations.
TIA
Darren
[Non-text portions of this message have been removed]
------------------------------------
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|