The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Bathroom Speakers Installation...any tips please?!


  • Subject: Re: Bathroom Speakers Installation...any tips please?!
  • From: "noel_pilot" <HA@xxxxxxxxxxxxxxxxxx>
  • Date: Thu, 08 May 2008 18:35:22 -0000

What does the Marmitek control? just the volume and source I assume?!
good thought thanks
Noel

--- In ukha_d@xxxxxxx, "Neil Ball" <neilball@...> wrote:
>
> I've re-used an old micro hifi for my in-ceiling speakers just now as
I
> still cannot decide which multiroom system to install. I've got 4
pairs
> around the house so have wired the speakers in a series/parallel
bridge to
> keep the impedance matched.  I also have an airport express
installed so I
> can stream music from a PC and control the hifi using a Marmitek RF
remote,
> bought it for around =A320 after a quick google. Works a treat for me
jus=
t
> now.
>=20
>=20=20
>=20
> Neil B.
>=20
>=20=20
>=20
>   _____=20=20
>=20
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On
Behalf Of
> noel_pilot
> Sent: 06 May 2008 08:44
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Bathroom Speakers Installation...any tips please?!
>=20
>=20=20
>=20
> Hi all,=20
> Well since my 'The Imp Magic Box' died on me last week I'm thinking of
> doing things properly and putting some ceiling speakers into my
> bathroom driven from a receiver/amp and airport express in the landing
> cupboard.
>=20
> Few questions....
>=20
> 1 - Speakers i'm looking at (found through search of the list) are
> http://www.rs100.
<http://www.rs100.co.uk/product_info.php?products_id=3D216>
> co.uk/product_info.php?products_id=3D216 they seem ok
> and will do the job for me I think, unless anyone says otherwise or
> anything better for sub =A350??
>=20
> 2 - Installation - Any tips, I've got an artexed (beyond belief the
> spikes are up to 1.5inches!!) ceiling, assume I just cut a nice hole
> and screw them in???!
>=20
> 3 - The amp/receiver =3D what i'd like is to have an amp with radio
> tuner so I can switch between either radio or the airport express on
> another input. Question is how I could do that switch. One option is
> a cheap harmony remote say with an IR receiver run to the cupboard but
> that seems like overkill. Only control I'm looking for is volume and
> source just to swap between either radio and cd (for airport) no
> control over radio stations required.
>=20
> Thoughts and assistance greatly appreciated.
>=20
> Needless to say it's VERY low budget, amp/receiver i intend to find on
> ebay or similar.
>=20
> Thanks
>=20
> Noel
>=20
>=20=20
>=20
>=20
>=20
> [Non-text portions of this message have been removed]
>



------------------------------------


UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.