[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: HDMI - Faceplate or Direct?
I'm running my HDMI cables direct to the LCD without faceplates;
partly as they're hidden behind and won't be seen and partly to
address the fear of loss in pic quality. Have you gone for a
"budget"
or "performance" HDMI cable?
Instead of a brush-outlet I guess you could fabricate something from a
modular (i.e. clip-in) faceplate using two blank covers? Cut a
half-moon into each to make a circular outlet for the cable to come
through, and fit with (two halves of) a rubber grommet to avoid the
cable chafing.
A bit of a fiddle but maybe neater than the brush outlet?
HTH,
Tim.
On Sat, Dec 6, 2008 at 2:25 PM, Mark McCall <lists@xxxxxxx> wrote:
> I'm running 10 metre HDMI cable to the new projector. I'm considering
a HDMI
> faceplate like this behind the AV rack...
>
> http://www.letsautomate.com/12424.cfm?
>
> Or is it better just to wack it straight into the amp without a
further
> break in the cable?
>
> M.
------------------------------------
********************************************
Limited Time Offer - Free iPhone VAT Calculator
http://berble.com/index.php/component/content/article/109
********************************************
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|