RE: Help - Leviton HCM06-1TW dimmer switch for x10

[John Murray <John@xxxxxxxxxxxxxxxxxxxx>]

No  experience of them, but the manual suggests it 'learns' the
relevant code:
Using a small pointed object (i.e., small screwdriver), depress and hold
the Minimum Brightness Level/Program Switch until the ON/OFF
LED flashes. The unit is now ready to accept a DHC code.
At a DHC single controller, verify code setting to be learned and press
upper rocker. The dimmer will now accept and memorize code.
(refer to Figure 2).
On a multi-button transmitter, verify base code then press the appropriate
ON button of row desired. The dimmer will accept and
memorize the appropriate code for that button.
NOTE: The code can be changed by repeating the procedure and selecting a
different code or button.



From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of Juan R
Sent: 20 August 2008 19:52
To: ukha_d@xxxxxxx
Subject: [ukha_d] Help - Leviton HCM06-1TW dimmer switch for x10
Importance: High


Hi,
I got the new leviton switch compatible with x10, but nowhere in the
instruction shows how to assign x10 codes to the device. I understand there
is no wheels for letters and numbers and that is suppose to be electronic,
but, how do i do that?
thanks for your help

here is the link to the device:
http://www.smarthome.com/4289.html



[Non-text portions of this message have been removed]


------------------------------------