[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: AD10 problem
Tim,
First thought - "No user servicable parts inside!" :(
Second thought - - are you sure the load is OK? i.e. it's not a blown
bulb/tripped RCD on the output? If it's clicking, then it suggests the
module is responding. If the load isn't following suit, sounds like a
"downstream" problem to me - - i.e. bulb/wiring between AD10 and
load.
sorry - not exactly helpfull - - you've caught me going to sleep rather
than
waking up!
R.
On 9/20/07, Tim Hawes <timsyahoo@xxxxxxx> wrote:
>
> I've got a Powerhouse DIN rail appliance module which doesn't seem
to
> switch on.
>
> I get no response to an "ON" signal from an X10 transmitter,
however
> an "OFF" results in a small click. Similarly when moving the
slider on
> the front, there's no output and no LED when pushed up to
"1" but
> there is a small click when moving from AUTO down to "0".
>
> Any idea what the problem is?
> Are there any serviceable parts inside?
>
> Thanks,
>
> Tim.
>
>
[Non-text portions of this message have been removed]
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|