[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: CBus again - DLT brightness
Just having a play with group level for the backlight - setting 0 does
seem to turn the backlight off completely :) Interestingly, you can set the
level to a granularity of 1%. At very low levels, the blue night light LED
is more apparent than the backlight but it does seem to go all the way down
to completely off.
This is a new DLT with firmware 2.1.0. What's yours on?
Paul.
> -----Original Message-----
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf
> Of John B
> Sent: 23 May 2007 21:18
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] CBus again - DLT brightness
>
> Hi Paul,
>
> OK, I've just checked and my DLT's backlight does indeed vary in
> brightness when I adjust the group level.
>
> The only thing I've noticed is that if I set the group to zero, the
> backlight seems to remain on, at a very low level.
> A quick scan of the CBus forums reveals that this seems to be a
> firmware issue, so may be fixed in the latest batch of DLTs.
>
> Even so, it's so dim that you can hardly notice it's on.
>
> HTH,
>
> John
>
>
>
>
>
>
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|