The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: CCTV question



Remember also, one run of this cable will serve one camera only - as
there is only one mini co-ax core and the others are power (ground and
+12V usually) and audio/PIR pairs.

Ben

--- In ukha_d@xxxxxxx, "Ben Geach" <BenUKHA@...> wrote:
>
> >http://cpc.farnell.com/jsp/endecaSearch/partDetail.jsp?sku=3DCB02516
>=20
> Yes this is mini-coax which is similar to the sort of cable we use to
> hook up component video signals. Should be fine for CCTV, just
> remember some plugs - perhaps solder-on phono plugs? Or just solder
> directly to camera video cable.
>=20
> Ben
>=20
> --- In ukha_d@xxxxxxx, "Jonathan Shaw" <semi.jon@>
wrote:
> >
> > Had a look at farnell.com and the belden coax plus other cores
cables=20
> > were =A3200+ for 150m which is a bit steep forsomething I might
use.
> > http://uk.farnell.com/jsp/endecaSearch/partDetail.jsp?SKU=3D1302867
> >=20
> > cpc.farnell.com have some multicore 75ohm cable which is much
cheaper=20
> > but this doesn't look like coax??=20
> > http://cpc.farnell.com/jsp/endecaSearch/partDetail.jsp?sku=3DCB02516
> > is this the stuff?
> >=20
> > Thanks
> > Jon
> >=20
> > --- In ukha_d@xxxxxxx, "David Gumbrell"
<david.gumbrell@>=20
> > wrote:
> > >
> > > Or you can get CCTV cable with several cores: a 75R coax for
the
> > > video, some power wires and a couple more for audio. You
need a run
> > > per camera. I think I got a roll from Farnell.
> > >=20
> > > Cheers,
> > >=20
> > > David
> > >=20
> > > On 3/6/07, John Nye <john@> wrote:
> > > > Hi Jon,
> > > >
> > > > How about cat5 with passive balun at each end - can
also supply=20
> > power.
> > > >
> > > > Something like these?=20=20
> > http://www.2seetv.co.uk/acatalog/CAT5_Cabling_.html
> > > >
> > > > John
> > > >
> >
>





UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.