The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Urgent PC Help Needed


  • Subject: Re: Urgent PC Help Needed
  • From: "darren_karp2001" <darren.karp@xxxxxxxxx>
  • Date: Tue, 06 Mar 2007 12:49:36 -0000

--- In ukha_d@xxxxxxx, "John Murray" <John.Murray@...>
wrote:
>
> If the system boots, but without display, can you vnc/rdp onto it=20
from elsewhere?
>=20
> If the system powers up, but does not boot, it's most likely a=20
faulty/badly seated component.  Strip out all but one dimm.
>=20
> I had a problem on my office PC where the mb would power on, but=20
no beeps or vga only last month.  I'd blown my bios chip, and had to=20
replace it.  Cost =A320ish including an extractor tool to get the old=20
chip out.  It turns out, I'd blown the bios ages before, and just=20
hadn't rebooted to discover the problem.
>=20
> http://www.biosflashuk.com/
>=20
>=20=20
>=20
> Before Christmas my mcepc would not boot, and no vga.  Mb powered=20
up though, just nothing happening.  I swapped out the PSU and up she=20
came.  Strange thing was, the old PSU was working and providing=20
power.  It just wouldn't allow the system to boot up.

The thing is I replaced the mobo with a brand new one (same model)=20
that I had lying around and it exhibited the exact same problem.=20
I've stripped out everything except for 2 sticks of memory and of=20
course the processor.

The PSU voltages are correct (not under load)....very weird.






UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.