RE: [OT, slightly] - logo projection

["David Harris" <dh140770@xxxxxxxxxxxxxx>]

As already said there are a few custom gobo places around.  Just
google
=91custom gobo=92.  I=92m sure they could handle your design.

Looking at HYPERLINK "http://www.customgobos.co.uk/"www.customgobos.co.uk
i=
t
suggests that you would need a glass gobo, A Metal gobo would be single
colour and you would see the joins, like a paper stencil really.  Glass
gobos are not cheap especially if you need full colour.  As suggested DHA
seem to be another supplier.

=20

For single gobo rotation and projection have a look at HYPERLINK
"http://www.martin.com/"www.martin.com

For the specific product =A3199 for a 250w projector with the gobo mounted
internally.  This unit can be run full time, is fan cooled and can rotate
the gobo. I can also run a 25 deg or 32 deg beam projection angles for a
bigger or smaller logo.
HYPERLINK
"http://dj-club.martin.com/product/product.asp?product=3Dmaniapr1"http://dj=
-cl
ub.martin.com/product/product.asp?product=3Dmaniapr1

=20

For more sophisticated projection and multiple you can use a scanner or
moving head, several of which allow interchangeable gobos, The image can
then be moved around the room.  You would also need a suitable DMX
controller (=A3100) to control direction, speed, gobo etc.  These are more
expensive as you would expect.

A scanner would be something like

HYPERLINK
"http://dj-club.martin.com/product/product.asp?product=3Dmaniascx600"http:/=
/dj
-club.martin.com/product/product.asp?product=3Dmaniascx600

which allows 2 glass and 5 metal gobos, so possibly it could serve more
tha=
n
one use. (=A3499)

=20

Hope this helps.

=20

Dave

=20

=20

=20

-----Original Message-----
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
White, Peter
Sent: 02 January 2007 09:52
To: ukha_d@xxxxxxx
Subject: [ukha_d] [OT, slightly] - logo projection

=20

All, I know somebody will know the answer to this...

I'm after a light unit that will project a logo onto a wall - ideally the
kind of thing you see in your local multiplex cinema where you've got UCI
(or some other brand) spinning around on a wall. I'm not so bothered about
the spinning bit, but the logo would need to be bright (it'll be projected
onto a white wall), sharp, and ideally not look like a stencil - i.e. the
logo is quite complicated, but I don't really want to see the connections
between the different bits of logo, so presumably I'd need some sort of gel
will a metal mask stuck on it?

I'm sure there's a website that has all this info, I just don't know the
technical terms to search for.....

Thanks, Pete


[Non-text portions of this message have been removed]

=20


--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.16.2/613 - Release Date: 01/01/2007
14:50



--=20
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.16.2/613 - Release Date: 01/01/2007
14:50
=20


[Non-text portions of this message have been removed]