[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: DS18S20's ...
From the HomeVision site..
"The Dallas Semiconductor DS1820 or DS18S20 can be used with
HomeVision-Pro, or with HomeVision and a Multifunction Expansion Board
<http://www.csi3.com/hv_p4.htm>.
The DS18S20 is a newer version, but
both work fine with HomeVision/HomeVision-Pro. (Note the part number
DS18B20 is NOT compatible with HomeVision/HomeVision-Pro)."
I have just tried a B version here on a 'pre final' version 3.5 ROM
which is the latest I have to hand and it doesn't work . I think Ian is
maybe referring to the S versions below
"The 3.43 PROM changed the digital temperature sensor reading to work
with the new, slower DS18S20 sensors."
Kevin
ian@xxxxxxx wrote:
> I was reading the update history on the HV site earlier and the latest
PROM
> supports the slower Dallas 'B' sensors if that helps. Not sure if it
was
> only HVPro or both, probably both.
>
> Ian
>
>
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|