The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Re: Joining Cat5 + Wall Cabinets



Are they fully Cat5e compliant?

Reason I ask is I searched a lot for something to extend a load of Cat5e
an=
d most that I found wasn't Cat5e certified (more for telephone type
cabling=
). I did find these though and bought 5 x 100 pair units to extend 125
cabl=
es:

http://www.siemon.com/uk/e-catalog/ECAT_GI_page.aspx?GI_ID=3D110_s110-wirin=
g-blocks

These are fully Cat5e and the 100pair field termination kit is only around
=
=A330ish IIRC - great for extending a large number too.



Paul.


> -----Original Message-----
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf
> Of milesy1981
> Sent: 04 December 2007 10:22
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Re: Joining Cat5 + Wall Cabinets
>=20
> I use one of these boxes with 237 connection strips to extend a
> existing set of CAT5 cables.
>=20
> http://www.austin-taylor.co.uk/pages/at250.htm
>=20
> http://www.austin-taylor.co.uk/pages/237a.htm
>=20
> you can see it here in my loft.
>=20
> http://www.chrismiles.org/old/ha_wiring.html
>=20
> Chris
> >
> > Hi All,
> >
> >
> >
> > Just after some suggestions and recommendations on the following:
> >
> >
> >
> > I need to move a patch panel and its 50 (ish) cables to another
> room which
> > requires the cables to be extended by about 15 meters due to some
> new
> > building work - I know bad planning . . . I just didn't  include
> the 'wife
> > will change mind factor' when I planned the original network.
> >
> >
> >
> > I need to remove the current patch panels and will only have
about
> a 30cm
> > (w) x 25cm (d) x 1m (h) to play with, or I can pull the cable
back
> up to the
> > first floor void -  Does anyone have any suggestions on joining
so
> many
> > cables?
> >
> >
> >
> > I plan to change the current cabinet to a larger one to include
> add new
> > switch and possible a rack mounted NAS (should be able to hide
the
> cost as
> > part of the 'modifications' budget J), so need something about
18U
> + with a
> > decent carrying weight, I'm guessing 25kg +.  Any recommendations
> or
> > suggestions?
> >
> >
> >
> > Many thanks,
> >
> >
> >
> > Steve
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>=20
>=20
>=20
>=20
>=20
>=20
>=20



UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.