[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: RS232 to Contact Closure
On 16 August 2007 at 12:37, "Chris White" <chrisw@xxxxxxx>
wrote:
>
> I am looking for a little interface devise that will offer RS232 to
> Contact Closure inputs and outputs.
>
> RS232 control to 8 or so dry contact closures outputs.
>
> 8 or so Contact Closure inputs to known RS232 strings.
>
> Ideally having all these on one box with 2 way comms on the RS232 port
> would be great.
I use a VIOM from Phaedrus[0] for this in my HA setup. Sounds like
you'd also need a relay board (or two).
-Mark.
[0] http://www.phaedrusltd.com/pages/index.html
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|