[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Serial commands to X10 and back again. TWSERIAL VB6 software??
- Subject: Serial commands to X10 and back again. TWSERIAL VB6
software??
- From: ian.bird@xxxxxxxxxxxxxx
- Date: Mon, 23 Oct 2006 17:11:51 +0100
Hi all
Is there a solution out there that can take a simple serial command like
'A10 on' or similar from a micro controller or similar and talk to an X10
mains interface to send it. Obviously this would need to be two way and
send a received X10 signal/command out of the serial port. Ideally it
would need to support the extended range of commands as well.
I actually have a TWSERIAL as sold by Laser but this does not support the
extended range of commands. By the way - If anyone else has some software
written in VB6 to send and receive these commands to a TWSERIAL and were
willing to share this would be good. I am not a coder per se and am
struggling with the VB3/4 samples given with the product.
Thanks
Ian
[Non-text portions of this message have been removed]
** Sponsored by http://www.BERBLE.com **
all the Cool Stuff, in one Place
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|