My IR combiner/splitter project (with some photos)

["Chris Miles" <chrismiles@xxxxxxxxxxxxxxxx>]

First of many thanks to Keith Doxey and Ray Newman for their help.

The circuit consists of 2 rectifier diodes to combine my IR inputs, and
then 4 x 470ohm resistors for each of the output.

Picture 1: My Video to CAT5 balun ( hacs.com ) with the infrared output
going into the unit and then driving the emitter going to the sky box which
can be seen just to the top of the picure.

http://www.flickr.com/photos/67309481@N00/301149598/

Picture 2: A close up of the closed unit (wall mountable enclosure)

http://www.flickr.com/photos/67309481@N00/301149680/

Picture 3: The circuit itself.

http://www.flickr.com/photos/67309481@N00/301150343/

The unit is connected to my CAT5 unit through a 3.5mm mono jack to
jack cable which I created the information on keiths tutorial on how to
make a IR emitter with a mono jack on the end. I will be doing some
emitters tomorrow night.

And also some more photos of my new house taking shape, if anyone
is interested.

http://www.flickr.com/photos/67309481@N00/

Chris

[Non-text portions of this message have been removed]




** Sponsored by http://www.BERBLE.com **
all the Cool Stuff, in one Place