Re: 1-wire temperature enclosures

["the_uk_stealth" <email@xxxxxxxxxxxxxx>]

Hi Guys,

Your right it was me who used the spent bullet casings for my
outdoors sensors. I used a clothing button for my in wall sensor
solution..  Here is my original post that was posted to the
HomeVision forum..  If your interested I will try and find the
photos..

"My solution for mounting Dallas DS1820 & DS18S20 Temperature
Sensors

I have been searching for a visually pleasing solution for mounting
the Dallas DS18S20 temperature sensors for a long time.

I think I may have now come up with a solution and I would like to
share it with you just in case you too were struggling with this one!

I have attached two photos of the finished articles.  One has a
brass button cap the other is encapsulated in an empty bullet shell
casing.

The button cap version is intended to be mounted flush in a interior
wall with just the brass button cap showing. (Approx size:- length =
one inch, black shaft = quarter of an inch and button head is = half
inch)

The bullet shell is intended to be used outdoors and can be
submerged.  (Approx size:- length = one inch, diameter is five
eights)

If you need any further details, just give me a shout!

Steve Jones"


--- In ukha_d@xxxxxxx, "Frank Mc Alinden" <frankmc@...>
wrote:
>
> Hi Keith
>
> > Didnt someone on the list use spent bullet casings ?
>
> Yep that was Steve  Jones a HVPRO user......
>
> Frank
>
> ----- Original Message -----
> From: "Keith Doxey" <ukha@...>
> To: <ukha_d@xxxxxxx>
> Sent: Wednesday, November 01, 2006 10:35 AM
> Subject: RE: [ukha_d] 1-wire temperature enclosures
>
>
> > Didnt someone on the list use spent bullet casings ?
> >
> > Keith
> >
> >
> > ** Sponsored by http://www.BERBLE.com **
> > all the Cool Stuff, in one Place
> >
> >
> >
> >
> >
>





** Sponsored by http://www.BERBLE.com **
all the Cool Stuff, in one Place